We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 5.5 mm barrel connector and detachable power cord

Kenuco

Kenuco power adapter for Zebra Eltron TLP2844 LP2844 GC420 label printers

SKU CH-MZ8V-DWP8H

AC adapter supplies 20 V 2.5 A to Zebra Eltron and GC label printers with a 5.5 × 2.5 mm connector

  • TypeAC Adapter
  • Powers multiple Zebra desktop printers from one adapter
  • Wide AC 100-240V input works worldwide
  • Delivers stable DC 20V 2.5A output for reliable printing
  • 5 x 2.5 mm barrel fits listed models exactly
  • Replaces OEM units FSP50-11 FSP060-RPBA OWA-60U-20 P1028888-001

Kenuco AC Adapter for Zebra Label Printers

This Kenuco AC adapter supplies DC 20V 2.5A power to compatible Zebra desktop label printers through a 5.5 * 2.5 mm connector. It accepts AC 100-240V input at 50-60Hz and includes a power cord. The unit replaces original adapters such as FSP50-11 and OWA-60U-20 for models across the LP, TLP, GC and GK series. It is a direct replacement power source for listed devices.

Suits owners of listed Zebra printers needing

This adapter fits operators who must replace a lost or failed original power supply for the specific Zebra models named in the compatibility list. It does not suit buyers who need a power supply for Zebra printers not listed above, or for any non-Zebra label printer. Users requiring a different output voltage, current rating or connector size should look at other adapters.

Output specification: DC 20V 2.5A

The single specification that decides fit is the DC 20V 2.5A output delivered through a 5.5 * 2.5 mm barrel connector. Your printer must require exactly this voltage, current and connector geometry. Verify the printer model against the supplied compatibility list before ordering, as the adapter will not work with devices needing different electrical parameters.

Highlights

  • Powers multiple Zebra desktop printers from one adapter
  • Wide AC 100-240V input works worldwide
  • Delivers stable DC 20V 2.5A output for reliable printing
  • 5 x 2.5 mm barrel fits listed models exactly
  • Replaces OEM units FSP50-11 FSP060-RPBA OWA-60U-20 P1028888-001

Specifications

TypeAC Adapter

Questions about this item

How do I connect the Kenuco adapter to my Zebra LP2844 and which step is often missed?

Plug the 5.5 × 2.5 mm barrel connector firmly into the printer's DC jack until it clicks, then attach the supplied power cord to the adapter and a 100-240 V AC outlet; the click is the step people skip.

What part will need replacement first on this 20 V 2.5 A supply?

The AC power cord and the DC cable near the barrel plug wear first; inspect both for cracking after heavy use and swap the cord or the whole adapter if insulation frays.

What limit appears first when the adapter runs a GC420d continuously?

Sustained 50 W output at 20 V 2.5 A hits thermal limits before voltage regulation drifts; keep vents clear and avoid enclosing the brick.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.