We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black figure-8 power cord 10 ft 18 AWG NEMA 1-15P to IEC 320 C7

KENTEK KT-2PCORD-18G-10FT 10 ft Figure-8 Power Cord 18 AWG 125V 10A

SKU CH-XB1A-QAG13

A 10-foot figure-8 power cord with NEMA 1-15P and IEC 320 C7 connectors, rated 125 volts and 10 amps using 18 AWG wire

  • Length10 feet
  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 125 volts; Current: 10 amps; Weight: 5.2 ounces; Co
  • 10 ft reach lets you place devices farther from the wall outlet
  • Figure-8 C7 connector fits laptop adapters and slim consoles without polarity concerns
  • 18 AWG conductors rated for 10 A at 125 V deliver reliable power to connected equipment
  • UL and CSA listings confirm the cord meets recognised North American safety standards
  • Lightweight 5.2 oz design makes routing and storage simple

Power connection for laptop adapters

This 10 foot figure-8 power cord connects a NEMA 1-15P plug to a non-polarised IEC 320 C7 inlet. It is rated at 125 volts and 10 amps using 18 AWG conductors. The cord suits laptop power bricks and devices such as the slim PlayStation 3 that require a two-prong non-polarised connection.

Build integration with standard two-prong inlets

The male-to-female layout plugs directly into a wall outlet and the device inlet without an adapter. Its non-polarised C7 end inserts either way, simplifying cable routing in tight spaces. UL and CSA listings confirm compliance with North American safety requirements for fixed wiring accessories.

Sustained load behaviour within rated limits

At the rated 10 amp continuous current the 18 AWG conductors operate within their design temperature rise. The cord carries the full rated load without exceeding the voltage and current limits marked on the jacket. Weight is 5.2 ounces, so the assembly adds minimal strain to the inlet during long sessions.

Highlights

  • 10 ft reach lets you place devices farther from the wall outlet
  • Figure-8 C7 connector fits laptop adapters and slim consoles without polarity concerns
  • 18 AWG conductors rated for 10 A at 125 V deliver reliable power to connected equipment
  • UL and CSA listings confirm the cord meets recognised North American safety standards
  • Lightweight 5.2 oz design makes routing and storage simple

Specifications

BrandKENTEK
ModelKT-2PCORD-18G-10FT
Length10 feet
Connector DetailMale-to-Female
SpecificationsVoltage: 125 volts; Current: 10 amps; Weight: 5.2 ounces; Connector: Male-to-Female; UL Listed: true

Questions about this item

Will the 18 AWG wire handle a continuous 10 A load without overheating?

The cord is rated for 10 A at 125 V, and the 18 AWG conductors meet UL and CSA ampacity requirements for that sustained current.

Does the jacket stay cool and quiet when the cord runs all day behind a desk?

With no active components the cord generates no fan noise, and normal resistive heating at 10 A stays within the temperature limits set by its UL listing.

What device inlet must my equipment have to accept the C7 end?

The equipment needs a non-polarised IEC 320 C7 figure-8 inlet — the two-round-hole socket found on many laptop adapters and slim consoles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.