KENTEK
KENTEK 3 ft C13 to C14 power cable 18 AWG 10 A 250 V black
A 3 ft IEC 320 C13 to C14 power cable rated 10 A at 250 V with 18 AWG conductors, built to UL, CSA and ISO 9001:2000 standards
- TypePower Cables
- 3 ft length reaches nearby outlets without excess cable
- C13 to C14 connectors fit standard PC and monitor power ports
- 18 AWG wire rated for 10 A at 250 V supplies reliable power
- UL and CSA listed with ISO 9001:2000 manufacturing quality
- Extends existing 3 prong cords for computers, monitors and consoles
Power cable for C13 and C14 devices
This KENTEK cable connects IEC 320 C13 and C14 connectors to extend a standard three-prong power cord by three feet. It is rated for 10 amps at 250 volts using 18 AWG wire. The black cord suits desktop computers, monitors and other equipment that uses the US standard three-prong inlet.
Steady current handling with certified construction
Under continuous load the 18 AWG conductors carry the rated 10 amps without exceeding temperature limits defined by the UL and CSA standards. The manufacturer follows an ISO 9001:2000 quality system, so each assembly meets the same electrical and mechanical criteria batch after batch.
Length and connector limits for rack and desk use
The three-foot length adds reach inside a rack or behind a desk but does not span longer distances between outlets and equipment. Only devices fitted with IEC 320 C13 or C14 ports can be connected, so appliances with different inlet styles will need a separate adapter or cord.
Highlights
- 3 ft length reaches nearby outlets without excess cable
- C13 to C14 connectors fit standard PC and monitor power ports
- 18 AWG wire rated for 10 A at 250 V supplies reliable power
- UL and CSA listed with ISO 9001:2000 manufacturing quality
- Extends existing 3 prong cords for computers, monitors and consoles
Specifications
| Type | Power Cables |
|---|
Questions about this item
Will the 18 AWG cable run warm when powering a monitor all day at 10 A?
At 10 A and 250 V the 18 AWG conductors stay within normal temperature limits for continuous use.
What connectors must my device and power source already have for this C13-to-C14 cord to plug in?
Your equipment needs an IEC 320 C14 inlet and the wall outlet or PDU must present an IEC 320 C13 socket.
Can I use this three-foot cord with a first-generation PS3 or Xbox 360 power brick that has a C14 inlet?
Yes, the C13 plug fits the console’s C14 inlet and the 10 A 250 V rating matches the original supply.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



