We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black XLR condenser microphone with 26mm diaphragm on articulated boom arm, includes pop filter

KENBAIDIO 308 XLR Microphone 26mm Boom Arm Kit

SKU CH-2QXP-ABX14

XLR condenser microphone with 26mm diaphragm, cardioid pattern and 78dB SNR includes boom arm kit for studio recording and streaming

  • ColorBlack Boom Arm Kit
  • ConnectorXLR
  • Microphone Sensitivity-34 decibels
  • Microphone Impedance150 ohm
  • Microphone Signal to Noise Ratio(SNR)78 decibels
  • Cardioid pattern isolates your voice from room noise
  • 26 mm large diaphragm captures detailed, natural sound
  • 78 dB signal-to-noise ratio keeps recordings clean
  • 34 dB sensitivity picks up quiet sources clearly
  • 48 V phantom power required for professional XLR operation

KENBAIDIO 308 XLR Condenser Microphone Kit

The KENBAIDIO 308 is a cardioid condenser microphone built around a 26mm large diaphragm capsule. It requires 48V phantom power from an audio interface, mixer or preamp to operate. The kit includes a boom arm, pop filter and premium XLR cable for immediate studio, streaming or podcasting setups. Its metal body resists electromagnetic interference for clean signal capture.

Capacity and headroom: 20Hz–20kHz frequency response

The microphone delivers a frequency response of 20Hz to 20kHz with a sensitivity of -34 decibels and a signal-to-noise ratio of 78 decibels. It handles extremely high sound pressure levels without distortion, making it suitable for loud vocals or close-miked instruments. The 150 ohm impedance ensures compatibility with standard professional preamps. Very quiet sources may need additional gain staging beyond typical interface headroom.

Thermals noise and power draw in normal use

As a passive condenser, the unit draws no power itself and produces no heat; all 48V phantom power is supplied externally by the connected interface or mixer. Self-noise is kept low by the 78 decibel signal-to-noise ratio and the shielded metal chassis. The included pop filter reduces plosive air blasts that can cause mechanical clipping. No active cooling or noise-generating components are present.

Highlights

  • Cardioid pattern isolates your voice from room noise
  • 26 mm large diaphragm captures detailed, natural sound
  • 78 dB signal-to-noise ratio keeps recordings clean
  • 34 dB sensitivity picks up quiet sources clearly
  • 48 V phantom power required for professional XLR operation

Specifications

BrandKENBAIDIO
Model308 Boom Arm XLR Mic
Part Number308
ColorBlack Boom Arm Kit
ConnectorXLR
Microphone Sensitivity-34 decibels
Microphone Impedance150 ohm
Microphone Signal to Noise Ratio(SNR)78 decibels

Questions about this item

Will the 308 XLR microphone work with my existing 48V phantom power interface?

Yes, the microphone requires 48V phantom power, an audio interface, mixer, or preamp to operate and connects via XLR.

How can I verify the 308 microphone is performing correctly after connecting it?

Check for a clean signal with low self-noise; the microphone has a signal-to-noise ratio of 78 decibels and sensitivity of -34 decibels.

Does the Boom Arm Kit include the XLR cable and pop filter, or must I buy them separately?

The kit includes a boom arm, pop filter, and premium XLR cable; only a 48V phantom power source or audio interface is needed separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.