We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 17 inch flexible gooseneck microphone with XLR connector

KENBAIDIO 17 Inch Gooseneck Microphone DMJ

SKU CH-MQ2C-X54K7

A 17-inch flexible gooseneck dynamic microphone with a unidirectional pattern, 600 ohm impedance, -53.5 dB sensitivity and a 3-pin XLR connector for DJ mixers, podiums and webcasts

  • ColorBlack
  • ConnectorXLR
  • Microphone Sensitivity-53.5 decibels
  • Microphone Impedance600 ohm
  • Clear voice capture with unidirectional pattern minimising off-axis feedback
  • Flexible 17-inch gooseneck bends 360° for precise positioning
  • XLR male connector plugs directly into mixers and PA systems
  • Dynamic capsule handles high SPL for shouting, karaoke and DJ use
  • Balanced 50 Hz–10 kHz response at 600 Ω impedance

Gooseneck Microphone for DJ and Broadcast

The KENBAIDIO DMJ is a 17 inch flexible gooseneck microphone built for DJs, webcasts, podium use, karaoke and school announcements. Its unidirectional dynamic capsule targets the speaker while rejecting off-axis noise and feedback. The 50 Hz to 10 kHz frequency response aims to keep voices clear and natural in live settings. It plugs straight into any XLR input on a mixer or PA system.

XLR Connector and 360 Degree Positioning

A 3-pin male XLR plug at the base connects directly to mixing consoles without extra cables or adapters. The metal gooseneck tube bends freely through 360 degrees, letting you set the capsule angle whether you stand, sit or move during a performance. Once positioned, the neck holds its shape for stable pickup throughout the session. The black finish suits stage and installed environments alike.

Dynamic Capsule with 600 Ohm Impedance

The dynamic element requires no phantom power and presents a standard 600 ohm impedance to the preamp. Rated sensitivity is minus 53.5 decibels at 1 kHz with a tolerance of 1.5 dB, delivering consistent output for speech and singing. As a passive dynamic design it generates negligible self-noise and draws no power, so thermal load and fan noise are non-existent in normal use. || Buyers who need a shorter or longer fixed shaft, a USB output or a condenser capsule for studio detail will not find those options here.

Highlights

  • Clear voice capture with unidirectional pattern minimising off-axis feedback
  • Flexible 17-inch gooseneck bends 360° for precise positioning
  • XLR male connector plugs directly into mixers and PA systems
  • Dynamic capsule handles high SPL for shouting, karaoke and DJ use
  • Balanced 50 Hz–10 kHz response at 600 Ω impedance

Specifications

BrandKENBAIDIO
Model17 Inch Gooseneck Microphone for DJ Mixer
Part NumberDMJ
ColorBlack
ConnectorXLR
Microphone Sensitivity-53.5 decibels
Microphone Impedance600 ohm

Questions about this item

How does the XLR connector limit the signal chain?

The 3-pin male XLR plugs straight into any mixer XLR input and caps the run at a balanced low-impedance line, so the 600 ohm output drives long cables without high-frequency loss.

What physical clearance does the 17-inch gooseneck need?

The 43 cm flexible tube bends 360° in any plane, so allow roughly half a metre of radius above the mounting surface for full articulation without hitting stands or screens.

How is the microphone mounted and what step is often missed?

Insert the XLR male into the mixer channel, tighten the locking ring, then shape the gooseneck; the step people skip is engaging the lock so vibration cannot twist the connector loose.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.