We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible LED strip on a reel, 10 mm wide, 300 individually addressable RGB LEDs, IP30 non-waterproof finish

KEHIPI

KEHIPI WS2812B5M60LB30E 5 m 60 LED/m 300 LED IP30 lighting

SKU CH-18PJ-1KKDK MPN WS2812B5M60LB30E

5-metre addressable RGB strip with 300 individually controlled LEDs at 60 per metre, 24-bit colour and IP30 rating for indoor DIY projects

  • ColorBlack Ip30
  • App-Enabledapplication
  • SpecificationsBTF-LIGHTING
  • Dimensions15.0 in x 10.0 in x 1.5 in
  • Weight0.05 kilograms
  • Package Contents3 PIN male connector
  • Individually addressable LEDs enable custom chasing and rainbow effects
  • 24-bit colour depth with 256 brightness levels per pixel
  • DC5V low-voltage design stays safe to touch during operation
  • Cuttable every 50 cm with pre-soldered joints for flexible layouts
  • Compatible with WLED, Raspberry Pi, ESP-8266 and commercial controllers

KEHIPI WS2812B 5 m 300 LED strip

This 5 m flexible LED strip contains 300 individually addressable WS2812B 5050 SMD LEDs at 60 LEDs per metre. It runs on DC5V input and delivers 24-bit colour depth with 256 brightness levels per pixel. The IP30-rated black PCB includes pre-soldered 3-pin JST-SM connectors and separable power wires for direct wiring. The strip can be cut every 50 cm at marked solder joints for custom lengths.

Suits DIY lighting projects

Makers, hobbyists and developers who want programmable colour-chasing, rainbow or meteor effects will find this strip compatible with WLED, Raspberry Pi, ESP-8266, ESP-32 and commercial controllers such as K-1000C, SP630E, SP530E, SP511E or Alexa-compatible DR03W. Buyers who need outdoor or wet-location installation should look elsewhere because this IP30 version has no silicone sheathing and no water resistance. Users without a separate DC5V power supply or controller cannot operate the strip out of the box.

DC5V input voltage decides power requirements

The strip operates exclusively from a DC5V source and the manufacturer recommends a 10 A supply for the full 300 LED length. No power supply or controller is included in the package, so the buyer must provide a compatible 5 V unit capable of delivering sufficient current for the desired brightness and effects.

Highlights

  • Individually addressable LEDs enable custom chasing and rainbow effects
  • 24-bit colour depth with 256 brightness levels per pixel
  • DC5V low-voltage design stays safe to touch during operation
  • Cuttable every 50 cm with pre-soldered joints for flexible layouts
  • Compatible with WLED, Raspberry Pi, ESP-8266 and commercial controllers

Specifications

BrandBTF-LIGHTING
ModelWS2812B5M60LB30E
ColorBlack Ip30
App-Enabledapplication
Part NumberWS2812B5M60LB30E
SpecificationsBTF-LIGHTING
Dimensions15.0 in x 10.0 in x 1.5 in
Weight0.05 kilograms
Package Contents3 PIN male connector

Questions about this item

Which length and density version should I choose for a 5 m run at 60 LEDs per metre?

This single listing is a 5 m strip with 60 LEDs per metre, giving 300 individually addressable pixels in total.

What does the 24-bit colour depth mean once the strip is installed?

Each pixel can display 256 brightness levels per channel, producing over 16 million colours for smooth gradients and chasing effects.

What interface does the WS2812B IC use and what does it limit in practice?

The built-in WS2812B IC uses a single-wire data protocol that requires a compatible controller such as WLED, ESP-8266, ESP-32 or SP630E to drive the 300 pixels at DC5V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.