KEHIPI
KEHIPI WS2811 12V Addressable RGB LED Strip 16.4ft 150 LEDs IP65 Lighting
12 V addressable RGB strip, 16.4 ft with 150 LEDs and 50 WS2811 ICs for per-group control, IP65 silicone coating and 3M VHB tape
- ColorBlack FPCB IP65
- App-Enabledtouch
- SpecificationsALITOVE
- Dimensions196.0 in x 2.0 in x 1.0 in
- Weight0.4 lb
- Package Contents1x 16.4ft 150 LEDs WS2811 LED strip, 1x Male 3PIN JST connec
- Programmable per segment with 50 WS2811 ICs controlling 150 5050 RGB LEDs
- IP65 silicone coating resists water jets for outdoor and indoor installations
- 3M VHB heavy-duty foam tape bonds securely to walls, ceilings and metal surfaces
- Compatible with Raspberry Pi, Arduino and SP-series app or music controllers
- Cuttable every three LEDs at marked lines to fit custom lengths
Product Overview
The KEHIPI WS2811 is a 12V addressable RGB LED strip measuring 16.4ft with 150 individually controllable 5050 LEDs. It uses WS2811 ICs grouped in threes to enable programmable colour effects for DIY lighting projects.
Suitability
Makers who want custom animations with Arduino, Raspberry Pi or SP-series controllers will appreciate the per-group control and IP65 silicone coating. Buyers needing a simple plug-and-play strip without a separate controller or those requiring full submersion protection should look elsewhere.
Installation Notes
The strip includes 3-pin JST-SM connectors and separate power wires on both ends for easy hookup and power injection. Cutting is only possible at the marked lines between groups. The upgraded 3M VHB foam tape adheres strongly, but surface preparation remains critical for long-term hold.
Highlights
- Programmable per segment with 50 WS2811 ICs controlling 150 5050 RGB LEDs
- IP65 silicone coating resists water jets for outdoor and indoor installations
- 3M VHB heavy-duty foam tape bonds securely to walls, ceilings and metal surfaces
- Compatible with Raspberry Pi, Arduino and SP-series app or music controllers
- Cuttable every three LEDs at marked lines to fit custom lengths
Specifications
| Brand | ALITOVE |
|---|---|
| Model | AL2811BK150IP65 |
| Color | Black FPCB IP65 |
| App-Enabled | touch |
| Part Number | AL2811BK150IP65 |
| Specifications | ALITOVE |
| Dimensions | 196.0 in x 2.0 in x 1.0 in |
| Weight | 0.4 lb |
| Package Contents | 1x 16.4ft 150 LEDs WS2811 LED strip, 1x Male 3PIN JST connector |
Questions about this item
What power supply do I need to run the 12V strip at its 36W maximum?
Use a 12V DC supply rated for at least 3A to deliver the full 36W per 16.4ft roll.
Will the 3-pin JST connector work with my older WS2811 controller that uses a 4-pin header?
The strip ships with a 3-pin JST-SM plug; you will need an adapter or to rewire for a 4-pin header.
How can I verify each 3-LED group is addressable after wiring it up?
Send a test pattern from your controller — each group of three 5050 LEDs should change colour independently.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
