KEHIPI
KEHIPI WS2811 12V 5m 150 LED Addressable RGB Strip Lighting
A 5 m addressable RGB strip with 150 LEDs grouped in threes, IP65 silicone coating and 3M VHB tape for custom lighting projects
- ColorWhite FPCB IP65
- App-Enabledapplication
- SpecificationsALITOVE
- Dimensions196.0 in x 2.0 in x 1.0 in
- Weight0.22 kilograms
- Package Contents1x 16.4ft 150 LEDs WS2811 LED strip, 1x Male 3PIN JST connec
- Individually addressable groups enable complex animations
- 12 V operation with 36 W maximum draw
- IP65 silicone coating resists water ingress
- 3M VHB foam tape provides strong adhesion
- Compatible with Raspberry Pi and SP-series controllers
Addressable RGB Strip for DIY Projects
This 12V WS2811 LED strip runs 5 metres and carries 150 individually addressable 5050 RGB LEDs grouped in threes. Each group is driven by a single WS2811 IC, allowing programmable colour effects such as chasing, fading and rainbow patterns. The reel is rated IP65 and uses a white flexible PCB coated in silicone for weather-resistant indoor or outdoor installations. It targets makers, hobbyists and installers building custom lighting for signs, architectural accents or interactive displays.
Check Voltage Controller and Power Before Installing
The strip requires a 12V DC supply capable of delivering up to 3A (36W) per full reel. You must provide a compatible programmable controller — such as a Raspberry Pi, Arduino, SP105E, SP108E, SP110E, SP106E, SP107E, SP501E or MHCTRWF5V — because none is included. Data runs at 800Kbps with a 2KHz port scan rate and uses a BRG colour order; verify your controller firmware supports this protocol. The reel ships with 3-pin JST-SM connectors on both ends plus separate power and ground wires for power injection on longer runs.
Upgrades Basic RGB Strips With Per-Group Control
Unlike standard analogue RGB tape that changes colour uniformly, this strip lets each 3-LED segment show its own hue and brightness, enabling complex animations and pixel-mapping effects. The 3M VHB foam backing replaces weaker hot-melt adhesives for a more durable mount on clean surfaces. Cut points occur every three LEDs so the reel can be shortened or rejoined by soldering at the marked lines. Buyers who need higher density, 5V operation, or a different IC protocol should look elsewhere.
Highlights
- Individually addressable groups enable complex animations
- 12 V operation with 36 W maximum draw
- IP65 silicone coating resists water ingress
- 3M VHB foam tape provides strong adhesion
- Compatible with Raspberry Pi and SP-series controllers
Specifications
| Brand | ALITOVE |
|---|---|
| Model | WS2811-150WH-IP65 |
| Color | White FPCB IP65 |
| App-Enabled | application |
| Part Number | AL2811WP150WHIP65 |
| Specifications | ALITOVE |
| Dimensions | 196.0 in x 2.0 in x 1.0 in |
| Weight | 0.22 kilograms |
| Package Contents | 1x 16.4ft 150 LEDs WS2811 LED strip, 1x Male 3PIN JST connector |
Questions about this item
What comes in the box and what extra parts are needed to run the strip?
The box contains one 5 m WS2811 strip with 150 LEDs and a 3-pin JST connector; a 12 V power supply and a compatible controller such as a Raspberry Pi or SP105E must be purchased separately.
How do I choose between the listed controller options for this strip?
Pick a controller that matches your project: Raspberry Pi or Arduino for code-based control, SP105E/SP108E/SP110E for app control, SP106E/SP107E for music sync, or SP501E/MHCTRWF5V for Wi-Fi smart-home integration.
What does the 36 W per roll figure mean when the strip is installed?
At full white brightness the 5 m roll draws up to 3 A at 12 V (36 W), so size the power supply accordingly and inject power at both ends to avoid voltage drop on longer runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
