We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange voltage tester screwdriver with LCD screen and steel tip

KEHIPI

KEHIPI VTS1000H Voltage Tester Screwdriver Orange

SKU CH-Q56T-YJXQM

A non-contact voltage tester with integrated screwdriver detects AC 12-1000V and CAT IV 600V with audible and visual alerts

  • Width5.207 in
  • Two-in-one tool combines voltage testing with a high-strength steel screwdriver for everyday electrical work
  • Non-contact detection up to 1000 V AC with CAT IV 600 V and CAT III 1000 V safety ratings
  • Dual sensitivity ranges from 12 V and 70 V to 1000 V for versatile measurements
  • Red tip light, red backlight and rising buzzer volume show voltage strength and proximity
  • Backlit screen and built-in flashlight enable use in dark areas with auto shut-off after five minutes

Two-in-One Voltage Tester & Screwdriver

The KEHIPI VTS1000H combines a non-contact AC voltage tester with a high-strength steel screwdriver tip. It targets electricians, automotive technicians and DIY users who need to verify live circuits and fasten terminals with a single tool. Safety ratings of CAT IV 600V and CAT III 1000V support professional use on mains and automotive wiring.

Dual Sensitivity & Multi-Mode Alerts

A selectable range switches between high sensitivity at 12-1000V and low sensitivity at 70-1000V for accurate detection in different environments. When voltage is present, the tip glows red, the backlit LCD shows a rising percentage bar and an audible alarm increases in volume. An integrated flashlight and auto-off after five minutes of inactivity assist work in dim locations.

Measurement Capacity & Limits

The tester covers AC voltages from 12V up to 1000V across two ranges, letting users trace live wires, find break points and distinguish live from neutral conductors. It does not measure DC voltage, current, resistance or continuity, so users needing full multimeter functions will require a separate instrument. The 5.207 in width keeps the tool compact for toolbox storage.

Highlights

  • Two-in-one tool combines voltage testing with a high-strength steel screwdriver for everyday electrical work
  • Non-contact detection up to 1000 V AC with CAT IV 600 V and CAT III 1000 V safety ratings
  • Dual sensitivity ranges from 12 V and 70 V to 1000 V for versatile measurements
  • Red tip light, red backlight and rising buzzer volume show voltage strength and proximity
  • Backlit screen and built-in flashlight enable use in dark areas with auto shut-off after five minutes

Specifications

BrandAstroAI
Width5.207 in

Questions about this item

What maintenance or replacement will the KEHIPI VTS1000H need later?

The only consumable is the battery powering the LCD, backlight, flashlight and audible alarm; replace it when the display dims or the alarm weakens. The integrated steel screwdriver tip is permanent and requires no replacement.

What limit appears first during sustained use of the KEHIPI VTS1000H?

The auto-off function shuts the tester down after five minutes without a detected signal or button press, so continuous monitoring sessions longer than that require periodic interaction.

How much noise, heat or power does the KEHIPI VTS1000H produce when running all day?

It draws minimal battery current; heat is negligible. The audible alarm volume rises with detected voltage level, and the only heat comes from the LCD backlight and flashlight during active use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.