We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular PoE splitter with micro USB and Ethernet ports, matte black finish

KEHIPI

KEHIPI U515902 PoE Splitter Gigabit 5V 2.4A Micro USB powerline networking

SKU CH-ND5M-WVCF9

Delivers 5 V 2.4 A power and 1000 Mbps data over Ethernet up to 400 ft, replacing AC adapters for micro-USB devices like Raspberry Pi 3B+ or security cameras

  • Interfaceethernet
  • Powerline Speeds1000 megabits_per_second
  • Connection Speeds1000 megabits_per_second
  • Dimensions8.0 in x 1.5 in x 5.0 in
  • Weight0.06 kilograms
  • Powers micro-USB devices with 5 V 2.4 A via Ethernet cable
  • Delivers gigabit data transfer at 1000 Mbps over the same line
  • Adds PoE to non-PoE gear from up to 400 feet away
  • Works with Raspberry Pi 3B+ and earlier without using GPIO pins
  • Requires IEEE 802.3 af compliant PoE injector or switch (not included)

KEHIPI U515902 PoE Splitter

The KEHIPI U515902 is a gigabit PoE splitter that delivers 5 V at 2.4 A through a micro USB connector. It separates power and data from a single Ethernet cable for devices such as Raspberry Pi 3B+, Echo Dot, micro USB security cameras and tablets.

Upgrade from separate power supplies

This splitter replaces an individual AC adapter when an IEEE 802.3af compliant PoE injector or switch is already present. The jump is worthwhile for installations up to 400 feet from a power outlet where running a single Ethernet cable is simpler than adding mains wiring.

Suits micro USB devices needing PoE

It suits builders who want to power micro USB hardware without occupying GPIO pins or blocking a Raspberry Pi case fan or add-on screen. Buyers without an 802.3af/at PoE source or who require a different voltage or connector should look at other options.

Highlights

  • Powers micro-USB devices with 5 V 2.4 A via Ethernet cable
  • Delivers gigabit data transfer at 1000 Mbps over the same line
  • Adds PoE to non-PoE gear from up to 400 feet away
  • Works with Raspberry Pi 3B+ and earlier without using GPIO pins
  • Requires IEEE 802.3 af compliant PoE injector or switch (not included)

Specifications

BrandUCTRONICS
ModelU515902
Interfaceethernet
Powerline Speeds1000 megabits_per_second
Connection Speeds1000 megabits_per_second
Dimensions8.0 in x 1.5 in x 5.0 in
Weight0.06 kilograms

Questions about this item

What are the dimensions of the U515902 PoE splitter so I can check it fits inside my Raspberry Pi case?

The splitter measures 8.0 in x 1.5 in x 5.0 in and weighs 0.06 kg, allowing it to sit alongside a Raspberry Pi 3B+ without using GPIO pins or blocking a fan-equipped case.

How do I install the U515902 and what is the common mistake to avoid?

Connect the splitter between an IEEE 802.3af/at compliant PoE injector or switch and the micro-USB device; the step users miss is confirming the upstream equipment is standard PoE, because passive injectors can over-volt and damage the splitter.

What maintenance or replacement should I plan for with the U515902?

No routine maintenance is required; the only future consideration is ensuring any replacement PoE injector or switch remains IEEE 802.3af/at compliant so the splitter continues to negotiate power safely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.