We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
KEHIPI tire inflator gauge with 2.5 inch glow dial and brass chuck

KEHIPI

KEHIPI Tire Pressure Gauge with Inflator 100 PSI 2.5" Dial

SKU CH-KJ1H-CGGEY

Measures 0-100 PSI with a 2.5" glow dial and inflates or deflates via a heavy-duty air chuck

  • Accurate readings backed by ANSI B40.1 calibration
  • Three functions in one tool: inflate, deflate, measure
  • Large 2.5 inch glow dial for clear visibility
  • Heavy-duty brass and stainless steel construction
  • Fits all Schrader valves and 1/4 NPT quick-connect fittings

Accurate 100 PSI gauge

The KEHIPI tire pressure gauge with inflator measures 0-100 PSI and meets ANSI B40.1 accuracy standards. A large 2.5 inch glow dial makes readings clear in low light. It combines inflation, deflation and pressure check in one tool. The heavy duty brass and stainless steel build suits truck and car owners who want reliable service.

Replaces separate tools

This unit replaces a standalone gauge, inflator and deflator for Schrader valve tyres. The jump is worth it when you want a single device that connects to 1/4 inch NPT air compressors and quick connect fittings. It is not for buyers who need a built-in compressor or digital readout. It also does not suit tyres that exceed the 100 PSI range.

Simple compressor connection

Attach the quick connect coupler to a 1/4 inch NPT air line and press the trigger to inflate or the reset button to deflate. The rubber hose and heavy duty air chuck stay secure during use. What usually goes wrong is cross threading the NPT fitting or forgetting to depress the reset button fully when deflating. The included case keeps parts together.

Highlights

  • Accurate readings backed by ANSI B40.1 calibration
  • Three functions in one tool: inflate, deflate, measure
  • Large 2.5 inch glow dial for clear visibility
  • Heavy-duty brass and stainless steel construction
  • Fits all Schrader valves and 1/4 NPT quick-connect fittings

Specifications

BrandAstroAI

Questions about this item

Will the 2.5" glow dial fit my truck's wheel well?

The gauge body measures 2.5 inches across the dial face; the heavy-duty air chuck and rubber hose add length, so check clearance between the valve stem and the wheel spokes before use.

How do I connect the inflator to my compressor without leaks?

Screw the ¼" NPT quick-connect fitting onto the compressor hose, then push the brass air chuck onto the Schrader valve until it seats; the most common mistake is not tightening the NPT threads fully before pressurising.

What part will wear out first on the 100 PSI gauge?

The brass chuck seal and rubber hose are the consumable items; ANSI B40.1 calibration stays valid, but inspect the chuck O-ring and hose for cracks after heavy use and replace them to keep accuracy.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.