We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
KEHIPI tire inflator gauge with auto-select valve head and 18 inch hose

KEHIPI

KEHIPI Tire Inflator Gauge 160 psi

SKU CH-N21F-DX1QA

Universal inflator fits Presta and Schrader valves automatically with a 0-160 psi gauge, pressure relief button, 18" hose and 1/4" NTP quick plug

  • Auto-select head fits Presta and Schrader without adapters
  • 160 psi gauge covers MTB and road tyres with tubes or tubeless
  • Integrated relief button and protected dial allow precise pressure control
  • 18 inch rubber hose and 1/4 inch NTP quick plug connect straight to a compressor
  • Fine-tuned lever inflates slowly for tubes or rapidly for tubeless setup

Universal valve compatibility

The KEHIPI inflator fits both Presta and Schrader valves with an automatic head that removes the need for separate adapters. It is built for cyclists who run mixed wheel sets or service different bikes in one session. Home mechanics and shop technicians can switch between tube and tubeless setups without changing tools. The 0-160 psi range covers mountain and road tyre pressures alike.

Compressor connection and hose

A 1/4" NTP quick plug is mounted on the unit so it connects directly to an air compressor line. The 18" rubber hose gives enough reach to work around frames and stands while keeping the gauge visible. An integrated pressure relief button lets you bleed excess air without disconnecting the head. The protected dial survives knocks on a busy bench.

Sustained workshop use

The fine-tuned lever controls flow from a slow trickle for delicate tubes to full volume for seating tubeless beads. Precision stays within +/-2% across the 0-160 psi span during repeated inflations. No batteries are required so the tool remains ready for continuous daily use. The analogue gauge avoids digital drift when the compressor cycles on and off.

Highlights

  • Auto-select head fits Presta and Schrader without adapters
  • 160 psi gauge covers MTB and road tyres with tubes or tubeless
  • Integrated relief button and protected dial allow precise pressure control
  • 18 inch rubber hose and 1/4 inch NTP quick plug connect straight to a compressor
  • Fine-tuned lever inflates slowly for tubes or rapidly for tubeless setup

Specifications

BrandCycloSpirit

Questions about this item

What is the maximum pressure this inflator can reach before the gauge limit is hit?

The gauge reads up to 160 psi, so that is the highest pressure you can measure with this tool.

Does the gauge or hose get hot or noisy when I am inflating tyres all afternoon?

There is no motor or battery inside; the tool simply passes compressed air, so it stays cool and silent during extended use.

What equipment must I already have connected for this inflator to work?

You need an air compressor with a standard 1/4" NTP quick-connect fitting to supply the compressed air.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.