We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular Bluetooth pixel controller with IR remote and three-button module, dual output ports, DC power jack

KEHIPI

KEHIPI SP611E Bluetooth pixel controller kit

SKU CH-BJ6W-1TWD7 MPN SP611E

Bluetooth pixel controller drives two identical outputs up to 600 LEDs each with app, remote or button control and music sync

  • ColorWhite
  • App-Enabledapplication
  • SpecificationsYoLink, White, 0 dB, Alkaline, 3 volts, Hub + 4 Leak Sensors
  • Dimensions15.0 in x 10.0 in x 3.0 in
  • Weight0.059 kilograms
  • Package ContentsIR Remote Control, DC power jack, 3Key Button
  • Control 600 pixels per port for large installations
  • 12 music effects plus 24 special effects expand creative options
  • Three control methods: app, IR remote, or box button
  • Built-in microphone plus phone or streaming audio sync
  • Colour calibration aligns app output with LED strip colours

Bluetooth Pixel Controller Kit

The KEHIPI SP611E is a Bluetooth-enabled pixel controller kit designed to drive addressable LED strips such as WS2812B and WS2811. It provides dual signal outputs for synchronised lighting across two runs. The package includes the controller, an IR remote control, a 3-key button and a DC power jack. No power supply or LED strip is included.

Suits App or Remote Users, Not SK6812RGBW Builders

This kit suits users who want three control options: a smartphone app, an IR remote or the onboard button box. It works with Android 4.4 and iOS 1.0 or higher via the Banlan X app. Builders using SK6812RGBW strips should look elsewhere because that chipset is not supported. The controller also requires a separate power supply matched to the LED strip voltage.

Dual Port 600-Pixel Limit

Each of the two output ports can control up to 600 pixels maximum and both ports mirror the same effect. This per-port pixel ceiling is the key figure that determines whether the controller can cover your intended strip length.

Highlights

  • Control 600 pixels per port for large installations
  • 12 music effects plus 24 special effects expand creative options
  • Three control methods: app, IR remote, or box button
  • Built-in microphone plus phone or streaming audio sync
  • Colour calibration aligns app output with LED strip colours

Specifications

BrandBTF-LIGHTING
ModelSP611E
ColorWhite
App-Enabledapplication
Part NumberSP611E
SpecificationsYoLink, White, 0 dB, Alkaline, 3 volts, Hub + 4 Leak Sensors, 1320 feet, aaa, 8, aa, 8, Application, 8 L x 2 W x 4 H inches, 5, Battery Powered, true, true, Desktop, Batteries, 0.61 kilograms, 6.9 L x 12 W x 19.6 H centimeters, 110 L x 110 W x 27 H millimeters, 2020-02-29T08:00:00Z, batteries_contained_in_equipment, installed_in_equipment, has_fcc_id, 2ATM71603; 2ATM77903
Dimensions15.0 in x 10.0 in x 3.0 in
Weight0.059 kilograms
Package ContentsIR Remote Control, DC power jack, 3Key Button

Questions about this item

How many pixels can each output port drive on the SP611E?

Each of the two signal ports can control up to 600 pixels, and both ports show the same lighting effect.

What voltage power supply must match the LED strip used with the SP611E?

The controller works at DC 5 V, 12 V or 24 V, but the supply voltage must be identical to the strip voltage you connect.

What physical connectors come in the box for wiring the SP611E?

The kit includes a 5.5 mm × 2.1 mm DC power jack, a 3-key button module and an IR remote control.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.