We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular controller with eight output ports and included RF remote

KEHIPI

KEHIPI SP608E 8-output LED lighting controller

SKU CH-8RK3-8RXNF MPN SP608E

An 8-output LED controller driving WS2811, WS2812B, WS2813, WS2815 and 1903 addressable strips with independent port effects, music sync.

  • ColorWhite
  • SpecificationsBTF-LIGHTING
  • Dimensions10.0 in x 6.0 in x 3.0 in
  • Weight0.07 kilograms
  • Package ContentsRF remote controller
  • 8 independent signal ports drive complex pixel projects without cross-talk
  • Bluetooth and app control plus included RF remote give multiple ways to manage lighting
  • Four trigger inputs sync turn, brake and reverse lights for automotive retrofits
  • Daily timer schedules up to five alarms with effects such as rainbow, fire and rhythm spectrum
  • Works with DC5V, DC12V and DC24V addressable strips including WS2811, WS2812B, WS2813 and WS2815

Eight-port pixel controller

The KEHIPI SP608E drives eight independent signal outputs for addressable LED strips such as WS2812B, WS2811, WS2813, WS2815 and 1903 ICs. Each port can run its own effect or all ports can be synchronised from the app. A built-in microphone and AUX input enable music-reactive modes. Power input accepts DC5V, DC12V or DC24V to match the connected strip voltage.

Indoor decorative and automotive accent projects

Suited for hobbyists building complex pixel installations who need per-port control without multiple controllers. The four trigger inputs let car builders link turn, brake and reverse signals to dedicated strip groups. Not for buyers who need SK6812RGBW support or outdoor-rated hardware. The timer memory clears if power is removed, so permanent installations need uninterrupted supply.

Wired trigger and app setup

Connect strips to the eight output terminals, feed the matching DC voltage, then pair the controller via Bluetooth to the Android or iOS app. Trigger wires attach to screw terminals for vehicle lighting sync. The RF remote pairs without extra steps. Common issues: forgetting to select the active output port in the app, losing timer schedules after a power cut, and exceeding the strip current rating on a single power feed.

Highlights

  • 8 independent signal ports drive complex pixel projects without cross-talk
  • Bluetooth and app control plus included RF remote give multiple ways to manage lighting
  • Four trigger inputs sync turn, brake and reverse lights for automotive retrofits
  • Daily timer schedules up to five alarms with effects such as rainbow, fire and rhythm spectrum
  • Works with DC5V, DC12V and DC24V addressable strips including WS2811, WS2812B, WS2813 and WS2815

Specifications

BrandBTF-LIGHTING
ModelSP608E
ColorWhite
Part NumberSP608E
SpecificationsBTF-LIGHTING
Dimensions10.0 in x 6.0 in x 3.0 in
Weight0.07 kilograms
Package ContentsRF remote controller

Questions about this item

What power supply voltage do my LED strips need to match this controller?

The controller works with DC5V, DC12V or DC24V strips; choose a supply that matches the strip voltage you are using.

Can I keep my existing RF remote and use it with the eight independent outputs?

Yes, the included RF remote can operate all eight outputs together or select individual ports for separate effects.

How can I verify each of the eight ports is driving its strip correctly after wiring?

In the app choose a port, pick a built-in effect such as rainbow or breathing, and confirm that only the connected strip responds while the others stay dark.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.