We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA power splitter cable with one 15 pin male connector branching to six female connectors, 18 AWG copper conductors, PVC jacket

KEHIPI

KEHIPI SATA Power Splitter 15 Pin to 6 Black 18 AWG

SKU CH-T5G4-TPC4J

Splits one 15-pin SATA power connector into six for HDDs, SSDs and optical drives using 18 AWG copper conductors

  • TypeSATA
  • ColorBlack
  • Connector DetailSata
  • Terminal GenderMale-to-Female
  • ConductorCopper
  • Featuressata Power Splitter cable 6 way
  • Splits one 15-pin SATA connector into six power outputs
  • Powers up to six HDDs, SSDs or optical drives simultaneously
  • 18 AWG tinned copper core delivers stable power transmission
  • PVC jacket provides insulation, flame retardance and wear resistance
  • Reduces wear on the original motherboard power connector

Six-device power distribution

The KEHIPI SATA Power Splitter converts a single 15-pin SATA power connector into six female SATA connectors, letting builders run up to six hard drives, SSDs or optical drives from one power-supply lead. It is aimed at system integrators and enthusiasts who need to expand internal storage without adding extra power cables or adapters.

PVC insulation and 18 AWG copper

The cable uses a tinned copper core rated at 18 AWG wrapped in an environmentally friendly PVC jacket that is insulated, flame-retardant and wear-resistant. This construction delivers stable power to each connected device while protecting the motherboard's original connector from repeated plug cycles.

Sustained multi-drive operation

Because all six outputs share the single 15-pin input, the splitter is suitable for powering multiple drives that run continuously, such as NAS arrays or media servers, provided the power supply can deliver the combined current. It is not intended for scenarios where peak draw from six drives simultaneously exceeds the source connector's rating.

Highlights

  • Splits one 15-pin SATA connector into six power outputs
  • Powers up to six HDDs, SSDs or optical drives simultaneously
  • 18 AWG tinned copper core delivers stable power transmission
  • PVC jacket provides insulation, flame retardance and wear resistance
  • Reduces wear on the original motherboard power connector

Specifications

BrandMbiydeg
Modelsata Power Splitter cable 6 way
TypeSATA
ColorBlack
Connector DetailSata
Terminal GenderMale-to-Female
ConductorCopper
Featuressata Power Splitter cable 6 way

Questions about this item

How do I install the 15 Pin SATA power splitter and what step do people often miss?

Connect the single 15 Pin male end to the power supply, then attach each of the six female SATA connectors to your drives; the step often missed is verifying every latch clicks fully home so no connector works loose under vibration.

What maintenance or replacement will the 18 AWG PVC-jacketed splitter need over time?

Inspect the PVC insulation and copper conductors periodically for cracking or discolouration; replace the cable if the jacket becomes brittle or any connector shows melted plastic from sustained high current.

What limit appears first when six drives draw power continuously through the 18 AWG copper cores?

The combined current capacity of the 18 AWG conductors is the first bottleneck; sustained loads near the wire gauge rating will cause voltage drop and heating before any connector rating is reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.