KEHIPI
KEHIPI rj45/rj11 Pass-Through Crimping Tool electrician tool
Crimps, strips and cuts RJ45 Cat5e/Cat6 and RJ11/RJ12 connectors in one compact, one-hand tool with built-in colour code
- Crimp RJ45 Cat5e Cat6 and RJ11 RJ12 connectors
- Cut strip and crimp with one compact tool
- One-hand operation with 2/3 size of traditional pliers
- Blade secured by clips and nails for clean cuts
- Built-in colour code chart for faster wiring
All-in-one Network Cable Tool
This KEHIPI crimping tool combines cutting, stripping and crimping functions in a single hand-held frame. It accepts RJ45 Cat5e and Cat6 pass-through connectors as well as RJ11 and RJ12 modular plugs. The compact design is roughly two-thirds the size of traditional pliers, allowing one-hand operation. A printed colour code on the tool body helps installers recall wiring sequences quickly.
Installers needing RJ45 and RJ11 termination
Technicians who terminate both Ethernet and telephone cables will appreciate the dual-connector support and integrated colour guide. The tool is not suited for users who only crimp non-pass-through RJ45 plugs or who require a full ratchet mechanism for high-volume production work. Buyers needing fibre-optic or coaxial termination should look elsewhere.
Pass-through RJ45 and RJ11/RJ12 compatibility
The decisive specification is the ability to crimp pass-through RJ45 Cat5e Cat6 8P8C connectors together with RJ11 RJ12 6P6C plugs in one tool. If your project uses standard feed-through RJ45 ends or different plug types, this model will not match the required crimp profile.
Highlights
- Crimp RJ45 Cat5e Cat6 and RJ11 RJ12 connectors
- Cut strip and crimp with one compact tool
- One-hand operation with 2/3 size of traditional pliers
- Blade secured by clips and nails for clean cuts
- Built-in colour code chart for faster wiring
Specifications
| Brand | PETECHTOOL |
|---|---|
| Model | rj45/rj11 crimp tool |
Questions about this item
How do I confirm the KEHIPI crimper is crimping pass-through RJ45 Cat5e Cat6 connectors correctly?
After crimping, inspect the connector to verify all eight wires are fully seated and visible through the pass-through front, then test continuity with a cable tester.
What comes in the box with the KEHIPI rj45/rj11 tool and what must I buy separately?
The tool includes integrated cutting, stripping, and crimping jaws with a built-in wire colour code chart; RJ45 Cat5e Cat6 and RJ11 RJ12 connectors are sold separately.
Which connector types should I choose for the KEHIPI crimper — RJ45 Cat5e Cat6 or RJ11 RJ12?
Use RJ45 8P8C pass-through connectors for Cat5e or Cat6 Ethernet cables and RJ11 RJ12 6P6C plugs for telephone or modem lines; the tool handles both.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
