KEHIPI
KEHIPI P1024-5PCS-3m 5PCS Alligator Clip Test Leads 1000V 15A 3m electrician tool
A set of five colour-coded test leads with pure copper alligator clips rated for 1000V and 15A, each 3m long for electrical testing
- Pure copper clips deliver 1000 V 15 A capacity
- 10 ft flexible leads reach distant test points
- Five colour coding prevents wiring mistakes
- Strong spring jaws grip up to 10 mm securely
- Rubber insulation stops clips slipping during use
Alligator clip test leads for electrical testing
This set supplies five dual-ended test leads fitted with pure copper alligator clips at both ends. Each lead measures three metres and is rated for one thousand volts and fifteen amperes. The five distinct colours allow quick identification during circuit checks on vehicles or bench equipment.
10 mm maximum clip opening
The crocodile clips open to a maximum width of ten millimetres, which determines the thickest conductor or terminal they can grip. If your test points exceed this dimension the clips will not hold securely and a different probe style is required.
Strong spring retains clamping force under load
A built-in spring maintains consistent pressure on the contact surfaces during sustained testing sessions. The rubber insulation prevents the clip from slipping on the wire, so the connection remains stable even when the lead is subjected to continuous fifteen-ampere current.
Highlights
- Pure copper clips deliver 1000 V 15 A capacity
- 10 ft flexible leads reach distant test points
- Five colour coding prevents wiring mistakes
- Strong spring jaws grip up to 10 mm securely
- Rubber insulation stops clips slipping during use
Specifications
| Brand | Goupchn |
|---|---|
| Model | P1024-5PCS-3m |
Questions about this item
What does the 1000 V rating mean when the leads are connected to a live circuit?
The 1000 V rating shows the maximum voltage the insulation and clips can withstand during testing; do not exceed it.
How does the 15 A limit affect what I can measure with these leads?
The 15 A limit caps the continuous current the copper clips and cable can carry; only test circuits fused at 15 A or less.
Will the 10 mm clip opening fit standard multimeter probes and automotive fuse terminals?
The 10 mm maximum jaw opening accepts typical probe tips and small fuse terminals found on vintage cars and motorcycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
