KEHIPI
KEHIPI LED Light Bulbs
A 16.4 ft IP67 waterproof LED strip with 60 LEDs per metre delivering RGB plus cool white from a single 5050 package
- FeaturesRGB+Pure white, 4 colors in 1 LED
- 16 million mixed colours from 4-in-1 RGBW LEDs
- 300 RGB plus 300 cool white LEDs on 5 m reel
- IP67 silicone sleeve suits wet areas
- Cuttable every 3 LEDs with 5-pin connectors
- Works with Tuya Zigbee, Bluetooth, WiFi and RF controllers
RGBW LED strip for home decoration
This 5 metre LED tape combines red, green, blue and cool white emitters in each 5050 package. It runs on DC12V and suits bedrooms, kitchens or general accent lighting where colour mixing and a pure white option are wanted. The reel is cuttable every three LEDs and includes male and female five-pin connectors for end-to-end linking.
Thermals noise and power draw
Power consumption ranges from 0.1 W per LED for a single colour up to 0.4 W per LED when all four channels are at full brightness, giving a total strip draw between 30 W and 120 W. The supplier recommends a DC12V 10 A 120 W power supply, which is not included. Operating temperature spans -25 °C to +50 °C, and the LEDs are rated for more than 50000 hours of use.
Build quality and daily mounting
The flexible PCB is 12 mm wide and sits inside a 14 mm white silicone sleeve rated IP67 for water resistance. Double-sided tape is not supplied on the IP67 version, so separate adhesive or clips are needed for mounting. The pin order is +12V-G-R-W-B; a compatible RGBW controller must be purchased separately to enable dimming, colour mixing and smart-home integration.
Highlights
- 16 million mixed colours from 4-in-1 RGBW LEDs
- 300 RGB plus 300 cool white LEDs on 5 m reel
- IP67 silicone sleeve suits wet areas
- Cuttable every 3 LEDs with 5-pin connectors
- Works with Tuya Zigbee, Bluetooth, WiFi and RF controllers
Specifications
| Brand | BTF-LIGHTING |
|---|---|
| Features | RGB+Pure white, 4 colors in 1 LED |
Questions about this item
How do I install the 5m IP67 LED strip and which step is often done wrong?
Clean the mounting surface, remove the silicone sleeve backing, press the 14mm strip firmly into place, then connect the 5-pin (+12V G R W B) ends in the exact pin order — reversing G-R-W-B is the common error.
What maintenance or replacement will the BTF-LIGHTING 5050 RGBW strip need later?
The LEDs are rated for 50000 hours; after that the whole 5m reel is replaced since individual 5050 SMDs are not serviceable and the IP67 silicone tube cannot be resealed once cut.
What limit appears first when running the strip at full RGBW 0.4W per LED continuously?
Total power reaches 120W (300 LEDs × 0.4W) so the DC12V 10A supply hits its current ceiling and voltage drop along the 16.4ft reel dims the far end first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
