KEHIPI
KEHIPI Jump Starter 3500A 150PSI with Air Compressor
A 3500A jump starter restarts 9.0L petrol or 6.5L diesel engines and inflates tyres to 150PSI with auto shut-off at 36L/min
- Jump-starts 9.0 L petrol and 6.5 L diesel engines with 3000 A peak current
- Inflates tyres to 150 PSI in 40 seconds at 36 L/min airflow
- 10 built-in safety protections prevent reverse polarity, overcharge and short circuits
- Charges phones and powers 12 V devices via integrated USB and DC outputs
- Operates from -4 °F to 140 °F with over 1000 recharge cycles
Six-function roadside tool
The KEHIPI jump starter combines emergency starting, tire inflation, lighting, pressure detection, device charging and 12 V accessory power in one unit. It is aimed at drivers who want a single device to handle common roadside emergencies without carrying multiple tools.
Integrated inflator with preset shut-off
The digital tire inflator delivers 36 L/min airflow and can fill a car tyre from 30 to 36 PSI in about 40 seconds. Three nozzles cover cars, bicycles and sports balls, while the LCD shows real-time pressure in four selectable units and the extension tube simplifies reach.
Metal clamps and ten safety protections
Heavy-duty clamps with a green ready indicator connect to 12 V batteries, backed by reverse-polarity, spark, short-circuit, overcharge, overcurrent, low-temperature, high-temperature, overvoltage, overload and reverse-charging safeguards. The unit operates from -4 °F to 140 °F and is rated for more than 1000 charge cycles, but it does not replace a workshop compressor for high-volume tasks.
Highlights
- Jump-starts 9.0 L petrol and 6.5 L diesel engines with 3000 A peak current
- Inflates tyres to 150 PSI in 40 seconds at 36 L/min airflow
- 10 built-in safety protections prevent reverse polarity, overcharge and short circuits
- Charges phones and powers 12 V devices via integrated USB and DC outputs
- Operates from -4 °F to 140 °F with over 1000 recharge cycles
Specifications
| Brand | carsun |
|---|
Questions about this item
How many recharge cycles can the internal battery handle before it needs replacing?
The internal battery is rated for more than 1000 charging cycles before replacement may be needed.
What is the maximum continuous airflow the compressor can sustain during extended inflation tasks?
The compressor delivers up to 36 L/min airflow and can inflate a car tyre from 30 to 36 PSI in roughly 40 seconds.
How hot does the unit get when the compressor runs continuously for a long period?
The device is built to operate in ambient temperatures up to 140 °F and includes high-temperature protection that shuts it down if internal heat exceeds safe limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



