Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00080949BTC
In stock
KEHIPI
KEHIPI Heavy Duty Closed Flow Lock On Tire Chuck with Clip Yellow
A closed-flow brass chuck with a locking clip fits Schrader valves and handles 250 PSI
- Locks securely onto Schrader valves with built-in clip
- 1/4" female NPT threads connect to most air inflators
- 250 PSI rated brass components handle heavy-duty inflation
- Straight tip design simplifies tire filling process
- Solid brass construction ensures long working life
Universal Schrader Valve Compatibility
This KEHIPI heavy-duty closed flow lock-on tire chuck connects to standard Schrader valves found on most passenger and light commercial tyres. The straight tip and locking clip secure the chuck to the valve stem without threading, preventing air leakage during inflation. Yellow finish aids visibility in a busy workshop or roadside kit.
Upgrade from Thread-On Chucks
The clip-on mechanism replaces traditional screw-on chucks that require multiple turns to seal. The jump is worth it when speed matters, such as fleet checks or roadside top-ups where seconds count. The 250 PSI brass construction withstands repeated commercial use that wears out lighter alloy or plastic alternatives.
1/4-Inch Female NPT Interface Limits
The 1/4-inch female NPT thread fits most common inflator gauges and compressor hoses, but will not mate with metric or proprietary quick-connect fittings without an adapter. Closed flow design only passes air when the internal valve opens, so the chuck cannot be used for passive pressure checks on its own.
Highlights
- Locks securely onto Schrader valves with built-in clip
- 1/4" female NPT threads connect to most air inflators
- 250 PSI rated brass components handle heavy-duty inflation
- Straight tip design simplifies tire filling process
- Solid brass construction ensures long working life
Specifications
| Brand | AstroAI |
|---|
Questions about this item
What size air-line fitting does the 1/4" female NPT chuck need to connect to my inflator?
The chuck has a 1/4" female NPT thread that screws directly onto a matching male fitting on most standard air inflators, compressors or gauge hoses.
How do I lock the clip onto the valve stem so it does not leak during inflation?
Press the straight brass tip squarely onto the Schrader valve, then flip the locking clip over the stem until it clicks; the clip holds the chuck perpendicular to prevent side-load leaks.
When should I replace the internal seal or the clip spring on this 250 PSI brass chuck?
Replace the seal if air hisses past the valve core when locked, and replace the clip spring when the clip no longer snaps shut with a firm click.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
