We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two Y-splitter cables with five-pin plugs and six extra male connectors on a flat surface

KEHIPI

KEHIPI HD8069 5-pin RGBW LED strip splitter cables 2-pack with 6 male plugs

SKU CH-MEX3-VQR55 MPN HD8069

Split one 12 V signal to two 12 mm RGBW strips using five-pin Y cables and six male plugs, no soldering needed

  • Voltage (Volts)12 volts
  • Split one controller signal to two RGBW strips
  • 12 V operation suits 5050, 3528 and 2835 LED types
  • 12-inch silicone-coated cables stay flexible in tight runs
  • Tin-plated copper conductors resist oxidation for lasting conductivity
  • Six extra 5-pin male plugs enable solder-free strip connections

5-pin RGBW splitter cables

These KEHIPI HD8069 cables split a single 12 volt signal into two branches for 12 mm wide 5050, 3528 or 2835 RGBW LED strips. The 2-pack suits installers who want to run two colour-changing strips from one controller without soldering. Each splitter includes three 5-pin male plugs for quick, tool-free connections.

Capacity and headroom

Two strips share the same power feed, so the supply must deliver enough current for both lengths combined. The tin-plated copper conductors and PVC insulation handle normal indoor runs, but voltage drop will appear on very long chains or high-density strips. No soldering is required, yet the arrow marks on strip and splitter must align for correct polarity.

Practical limits of the 5-pin interface

The 5-pin layout carries common anode plus four colour channels, limiting use to RGBW strips with matching pinout. It cannot drive RGBIC or addressable strips that need a data line. The 12 inch cable length restricts spacing between the controller and the first split point.

Highlights

  • Split one controller signal to two RGBW strips
  • 12 V operation suits 5050, 3528 and 2835 LED types
  • 12-inch silicone-coated cables stay flexible in tight runs
  • Tin-plated copper conductors resist oxidation for lasting conductivity
  • Six extra 5-pin male plugs enable solder-free strip connections

Specifications

BrandSUPERNIGHT
ModelHD8069
Part NumberACC1269
Voltage (Volts)12 volts

Questions about this item

Will these 5-pin splitter cables work with my existing 12 mm wide 5050 RGBW LED strips?

Yes, the splitter cables are designed for SMD 5050, 3528 and 2835 RGBW LED strip lights that are 12 mm wide.

How can I verify the connection is correct after plugging in the splitter?

Align the arrow marks on the splitter and the strip light connector; a snug fit indicates a reliable connection.

What comes in the 2-pack and do I need any extra parts to join multiple strips?

The box includes two 1-to-2 splitter cables and six 5-pin male plugs; a power supply with enough capacity for all connected strips must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.