KEHIPI
KEHIPI GY6.35 LED Bulb 5W 500lm 12V 3000K 4 Pack
Four-pack of 12 V GY6.35 bi-pin LED bulbs, each 5 W and 500 lm at 3000 K with 80 CRI and 360° output, non-dimmable, ceramic body 18 mm by 48 mm
- TypeLED
- ColorWarm White
- Replaces a 50 W halogen using only 5 W
- 500 lumens of warm-white light at 3000 K
- 80 CRI renders colours accurately
- Fits standard GY6.35 bi-pin sockets for easy installation
- 360° beam angle suits chandeliers, landscape and accent fixtures
Replacement halogen capsule
The KEHIPI GY6.35 LED bulb uses 5W to deliver 500lm, matching a 50W halogen at 3000K warm white. A four-pack suits landscape, chandelier or accent fixtures that run on stable AC/DC 12V circuits. Non-dimmable operation keeps the driver simple and reliable.
Ceramic heat-sink with bi-pin base
The standard GY6.35 bi-pin base plugs directly into existing sockets, while the ceramic body and PC cover run cool to the touch. At 18mm by 48mm the capsule is noticeably longer and fatter than traditional halogen GY6.35 bulbs, so fixture clearance must be checked before fitting.
12V-only non-dimmable constraint
The bulb accepts only AC or DC 12V and will fail if connected to 120V mains. No dimming function is supported, so it must be paired with a compatible LED transformer and a plain on-off switch. The 360-degree beam and 80 CRI suit general illumination but not colour-critical tasks.
Highlights
- Replaces a 50 W halogen using only 5 W
- 500 lumens of warm-white light at 3000 K
- 80 CRI renders colours accurately
- Fits standard GY6.35 bi-pin sockets for easy installation
- 360° beam angle suits chandeliers, landscape and accent fixtures
Specifications
| Brand | TAIYALOO |
|---|---|
| Type | LED |
| Color | Warm White |
Questions about this item
Does the GY6.35 bi-pin base work with a standard 12 V AC/DC transformer?
Yes, the bulb is rated for AC/DC 12 V input and requires an LED-compatible transformer; do not connect it directly to 120 V mains.
Will the 18 mm by 48 mm ceramic body fit inside my existing GY6.35 fixture?
The lamp measures 0.7 inch in diameter and 1.89 inches long, which is longer and fatter than a traditional halogen capsule; verify the fixture clearance before purchase.
How do I install the bulb without damaging the pins or the driver?
Align the two bi-pin contacts with the socket holes, push straight in until fully seated, and ensure the transformer is LED-compatible and non-dimmable to avoid flicker or premature failure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



