We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular PoE splitter with RJ45 and Micro USB ports plus attached USB-C adapter, matte black finish

KEHIPI

KEHIPI Gigabit PoE Splitter 5V 3A 2-in-1 USB-C Micro USB 1000Mbps

SKU CH-M9XH-WVKF9

Splits a single Ethernet cable into 5V 3A power and gigabit data for USB-C or Micro-USB devices

  • Powerline Speeds1000 megabits_per_second
  • Connection TypeIEEE 802.3
  • Connection Speeds1000 megabits_per_second
  • Featuresnon
  • Weight0.059 kilograms
  • Package Contentsnon
  • Powers devices and carries data over one cable with 1000 Mbps speed
  • Delivers 5V 3A output with overvoltage, short-circuit and overcurrent protection
  • Works with both Micro USB and USB-C devices using the included adapter
  • Complies with IEEE 802.3af/at PoE standards for safe power negotiation
  • Plug-and-play setup requires no extra power cables or configuration

2-in-1 Gigabit PoE Splitter

The KEHIPI Gigabit PoE Splitter converts IEEE 802.3af/at Power over Ethernet into 5V 3A output through a Micro USB port with an included USB-C adapter. It delivers data at 10/100/1000 Mbps over a single Ethernet cable. Built-in overvoltage, short-circuit and overcurrent protection safeguards connected hardware. The unit weighs 0.059 kg.

Micro USB to USB-C adapter included

The bundled adapter converts the native Micro USB output to USB-C, letting one splitter serve both connector types without extra cables. This allows direct power and data delivery to Raspberry Pi 3 models via Micro USB or Raspberry Pi 4 models via USB-C. Installation is plug-and-play with no configuration required.

Ideal for Raspberry Pi and IP cameras needing PoE

Suits builders powering Raspberry Pi 3B/3B+/4B/4B+ boards, security IP cameras, tablets, smart home hubs, IP phones or wireless access points from a standard PoE switch or injector. Not for networks limited to 10/100 Mbps infrastructure. Buyers needing passive PoE compatibility or higher voltage outputs should look elsewhere.

Highlights

  • Powers devices and carries data over one cable with 1000 Mbps speed
  • Delivers 5V 3A output with overvoltage, short-circuit and overcurrent protection
  • Works with both Micro USB and USB-C devices using the included adapter
  • Complies with IEEE 802.3af/at PoE standards for safe power negotiation
  • Plug-and-play setup requires no extra power cables or configuration

Specifications

BrandUCTRONICS
Powerline Speeds1000 megabits_per_second
Connection TypeIEEE 802.3
Connection Speeds1000 megabits_per_second
Featuresnon
Weight0.059 kilograms
Package Contentsnon

Questions about this item

Will the Micro USB port or the USB-C adapter wear out from repeated swapping?

The adapter plugs into the fixed Micro USB port on the splitter; only the small adapter itself is moved when switching between Micro USB and USB-C devices.

What throughput ceiling appears first when the link runs at full 1000 Mbps continuously?

The RJ45 ports are rated for 10/100/1000 Mbps, so the Ethernet link itself sets the 1000 Mbps limit under sustained load.

Does the unit produce noticeable heat or fan noise during all-day operation?

The splitter has no fan and relies on passive dissipation; with over-voltage, short-circuit and over-current protection it runs silently.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.