KEHIPI
KEHIPI Dual Band 2.4/5.8 GHz 6 dBi RP-SMA Antenna 2-Pack
Dual-band omni-directional antennas add 6 dBi gain on 2.4 and 5.8 GHz bands using RP-SMA male connectors
Option 2-Pack [RP-SMA] Male Antenna
- 4-Pack [RP-SMA] Male Antenna
- 2-Pack [RP-SMA] Male Antenna
- Dual-band coverage from 2.4 GHz to 5.8 GHz
- 6 dBi gain extends wireless range
- Omni-directional pattern covers all angles
- RP-SMA male connector fits common routers
- Operates from -20 °C to +80 °C
Dual-band 6 dBi RP-SMA antennas
This two-pack supplies 6 dBi omni-directional antennas with RP-SMA male connectors. They operate on 2.4 GHz (2400-2485 MHz) and 5.8 GHz (5150-5850 MHz) bands for WiFi 2 devices such as routers, USB adapters, PCIe cards and IP cameras.
RP-SMA connector and VSWR limit
Each antenna uses an RP-SMA male plug with a centre hole and no pin; it will not mate with standard SMA jacks. The voltage standing wave ratio stays below 2.0 across both bands, so mismatch loss is kept low for typical router or gateway ports.
6 dBi gain sets the coverage trade-off
The 6 dBi figure concentrates signal horizontally, extending range at the expense of vertical beamwidth. Buyers needing wider vertical coverage for multi-floor homes or steep drone angles should consider lower-gain models instead.
Highlights
- Dual-band coverage from 2.4 GHz to 5.8 GHz
- 6 dBi gain extends wireless range
- Omni-directional pattern covers all angles
- RP-SMA male connector fits common routers
- Operates from -20 °C to +80 °C
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Should I get the single or the two-pack for a router with two antenna ports?
The two-pack supplies one antenna for each port, giving full dual-band coverage on both 2.4 GHz and 5.8 GHz chains.
What does the 6 dBi gain actually do for my Wi-Fi range?
It focuses the signal horizontally, extending reach on the same floor while reducing coverage directly above or below the router.
Will the RP-SMA male connector fit my device, and what frequency limits apply?
The RP-SMA male plug mates with RP-SMA female jacks and covers 2400-2485 MHz and 5150-5850 MHz, matching standard dual-band WiFi 2 equipment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.




