KEHIPI
KEHIPI DPS-VI DisplayPort 1.4 Switch 2 in 1 Out 1 in 2 Out 8K 60Hz Grey
Bidirectional DisplayPort 1.4 switch toggles two sources on one screen or one source across two displays at 8K 60 Hz, 4K 120 Hz, 1080p 240 Hz with included power cable
- TypeDP
- Changer TypeHDMI
- ColorGrey
- Ports3
- Cable Length10
- Input Connector3
- Bidirectional DP 1.4 switch toggles two sources on one screen or one source across two displays
- 8K 60 Hz, 4K 120 Hz, 1080P 240 Hz support delivers high-resolution video and audio
- Included USB power cable stabilises 1-in-2-out operation and prevents flicker or black-screen issues
- Plug-and-play one-button switching requires no drivers or software setup
- Grey 3-port enclosure weighs 0.1 kg and measures 10 cm cable length for tidy desk placement
Versatile DisplayPort Switch
The KEHIPI DPS-VI is a bidirectional DisplayPort 1.4 switch that handles both 2 in 1 out and 1 in 2 out configurations. It lets you share one monitor between two computers or send a single source to two displays. The unit is plug-and-play with a simple one-button toggle for instant switching. It suits home-office users and gamers who need flexible screen management without software drivers.
Thermals and Power
An included USB power cable supplies extra current to keep the signal stable at high resolutions. The compact grey enclosure weighs 0.1 kilograms and runs without a fan, so operation stays silent. Power draw is minimal and the aluminium shell dissipates warmth passively during normal desktop use. No active cooling is required for typical switching tasks.
Sustained Load Behaviour
The switch maintains 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz continuously when powered correctly. Bandwidth reaches 32.4 Gbps to prevent flicker or black-screen events during long sessions. Both connected displays cannot show content simultaneously; only the active port receives a signal. A standard DP 1.4 cable is required on each link to sustain these rates.
Highlights
- Bidirectional DP 1.4 switch toggles two sources on one screen or one source across two displays
- 8K 60 Hz, 4K 120 Hz, 1080P 240 Hz support delivers high-resolution video and audio
- Included USB power cable stabilises 1-in-2-out operation and prevents flicker or black-screen issues
- Plug-and-play one-button switching requires no drivers or software setup
- Grey 3-port enclosure weighs 0.1 kg and measures 10 cm cable length for tidy desk placement
Specifications
| Brand | KEHIPI |
|---|---|
| Part Number | DPS-VI |
| Type | DP |
| Changer Type | HDMI |
| Color | Grey |
| Ports | 3 |
| Cable Length | 10 |
| Input Connector | 3 |
| Output Connector | Female |
| Weight | 0.1 kilograms |
Questions about this item
How do I install the KEHIPI DPS-VI and power it correctly?
Connect each device with a standard DisplayPort 1.4 cable, then plug the included USB power cable into the switch and a USB port or adapter; the unit needs that external power to avoid flicker or black screens.
What maintenance or replacement will the KEHIPI DPS-VI need over time?
The switch itself has no moving parts or consumables; only the DisplayPort 1.4 cables or the USB power cable may wear out and need replacing after extended use.
What is the first limit I will hit when running 8K 60 Hz content continuously?
The 32.4 Gbps bandwidth ceiling of the DisplayPort 1.4 link is the hard limit; sustained 8K 60 Hz uses the full pipe, so any cable quality drop or added adapter will cause signal loss first.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
