Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.0008151BTC
In stock
KEHIPI
KEHIPI Digital Tire Pressure Gauge Inflator 250 PSI 360° Chuck Extended Hose Case
Digital tire inflator with gauge checks, inflates and deflates tyres up to 250 PSI using a 360° chuck, extended hose and backlit LCD
- 3-in-1 tool inflates, deflates and reads pressure
- Digital gauge accurate within 1% from 3-250 PSI
- Four units: PSI, KPA, BAR, KG/CM²
- Backlit LCD shows large .1 resolution digits
- 360° rotating chuck seals tight with no leaks
3-in-1 Digital Inflator Kit
The KEHIPI digital tire pressure gauge combines inflation, deflation and pressure measurement in one tool. It connects to a standard ¼NPT air compressor outlet and covers a range of 3-250 PSI with 0.1 display resolution. A bright LCD backlight makes readings clear in low light. The kit includes a 360° rotatable heavy-duty air chuck, an extended rubber hose, a quick-connect coupler and a carrying case.
Upgrade from basic stick gauges
Moving to this digital inflator replaces separate analogue gauges and manual chucks with a single calibrated unit accurate to within 1% of exact pressure. The jump is worth it when you need four selectable units — PSI, KPA, BAR, KG/CM² — and a secure seal that prevents leakage during inflation. Buyers who want a self-contained compressor or cordless operation will not find that here.
Limits of ¼NPT compressor dependency
The inflator only works when attached to an external air compressor supplying a ¼NPT output; it has no internal pump or battery. Practical pressure readout stops at 250 PSI (17.2 bar, 1724 KPA, 17.5 KG/CM²), so higher-pressure systems fall outside the calibrated range. The 360° chuck and extended hose improve access, but reach is still bounded by the hose length supplied.
Highlights
- 3-in-1 tool inflates, deflates and reads pressure
- Digital gauge accurate within 1% from 3-250 PSI
- Four units: PSI, KPA, BAR, KG/CM²
- Backlit LCD shows large .1 resolution digits
- 360° rotating chuck seals tight with no leaks
Specifications
| Brand | ENDARK |
|---|
Questions about this item
What thread size does the quick-connect coupler need on the air compressor?
The coupler fits a standard ¼NPT compressor output so it threads directly onto most shop and portable units.
How do you attach the 360° chuck to the valve without cross-threading?
Align the chuck straight on the valve stem, push firmly until it seats, then rotate the swivel body — not the nut — to orient the hose; the 360° joint swivels independently.
When should the rubber hose and chuck seals be inspected or replaced?
Check the hose for cracks and the chuck O-ring for flattening every few months; replace either part at the first sign of air leakage or visible wear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
