KEHIPI
KEHIPI DC-DC Buck Converter 20-90V to 12V 6A IP68 Waterproof
Steps down 20-90V DC to 12V 6A with IP68 waterproof aluminium case and over 96% efficiency
- Type72V to 12V 6A
- ColorSilver
- Weight0.1 kilograms
- Wide 20-90V input suits many DC sources
- 12V 6A output powers demanding 12V loads
- Over 96% peak efficiency cuts waste heat
- IP68 rating blocks water and dust ingress
- Multiple protections guard against faults and reverse polarity
KEHIPI DC-DC Buck Converter 20-90V to 12V
This step-down voltage regulator converts a wide DC input range into a stable 12V output rated at 6A. It suits automotive, solar, industrial and DIY projects that need reliable 12V power from higher-voltage sources such as 24V, 36V, 48V, 60V or 72V systems.
Input voltage range 20-90V DC
The module accepts any DC supply between 20V and 90V and delivers a fixed 12V output. If your source falls outside this window the converter will not operate correctly, so verify your battery or supply voltage before purchase.
IP68 waterproof aluminum housing
The sealed aluminum case resists water, dust, moisture and shock, allowing direct mounting in exposed locations. Wiring requires only four connections; the main installation error is reversing the input polarity despite the built-in reverse-connection protection.
Highlights
- Wide 20-90V input suits many DC sources
- 12V 6A output powers demanding 12V loads
- Over 96% peak efficiency cuts waste heat
- IP68 rating blocks water and dust ingress
- Multiple protections guard against faults and reverse polarity
Specifications
| Brand | DROK |
|---|---|
| Model | DROK DC-DC Buck Volt Converter |
| Part Number | DROK DC-DC Buck Volt Converter |
| Type | 72V to 12V 6A |
| Color | Silver |
| Weight | 0.1 kilograms |
Questions about this item
What does the 6 A rating mean for devices I connect to the 12 V output?
The converter can supply up to 6 A continuously, so any 12 V load drawing 6 A or less will run without triggering over-current protection.
How does the 20–90 V input range limit the sources I can use?
It accepts DC sources from 20 V to 90 V, covering common 24 V, 36 V, 48 V, 60 V and 72 V battery packs, but will not start below 20 V or survive above 90 V.
What mounting provisions does the aluminium case provide?
The IP68-rated aluminium shell is designed for panel or bulkhead mounting; its flat faces and threaded holes let you bolt it directly to a chassis or enclosure.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



