We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KEHIPI

KEHIPI DC Buck Converter 9V-36V to 5.2V 3.5-6A Blue

SKU CH-P733-AGND2

Steps down 9 V–36 V DC to 5.2 V with USB output, delivering up to 30 W at lower input voltages

  • TypeBlue/1pcs
  • Weight0.018 kilograms
  • Wide 9 V–36 V input suits varied power sources
  • Synchronous rectification delivers high efficiency across the range
  • USB port with quick-charge chip powers phones directly
  • DC jack plus terminals simplify wiring for any device
  • Compact 63×27×10 mm board fits tight enclosures

Compact DC buck converter for 5 V USB devices

This step-down module accepts a DC input between 9 V and 36 V and delivers a regulated 5.2 V output through a USB port and screw terminals. It is aimed at hobbyists, installers and anyone powering phones, tablets or small 5 V loads from a higher-voltage source such as a vehicle or industrial supply.

Fits into a build with DC terminals and USB output

The board measures 63 mm by 27 mm by 10 mm and weighs 22 g, so it sits easily inside enclosures or behind panels. Synchronous rectification keeps efficiency high across the input range, while the DC jack, terminal block and USB socket give multiple wiring options without extra adapters. Quick-charge identification allows compatible phones to negotiate faster charging.

Output current falls as input voltage rises

At 9 V to 24 V input the converter supplies up to 6 A (30 W). Between 24 V and 32 V the limit drops to 5 A (25 W), and from 32 V to 36 V it falls further to 3.5 A (18 W). Designers must size the source and cooling for the lowest current band that matches their actual input voltage.

Highlights

  • Wide 9 V–36 V input suits varied power sources
  • Synchronous rectification delivers high efficiency across the range
  • USB port with quick-charge chip powers phones directly
  • DC jack plus terminals simplify wiring for any device
  • Compact 63×27×10 mm board fits tight enclosures

Specifications

BrandDROK
ModelDROK-[unknown]
Part NumberFBA200730
TypeBlue/1pcs
Weight0.018 kilograms

Questions about this item

What is the maximum continuous output power before the 30 W limit at 9-24 V input drops to 25 W at 24-32 V?

The converter delivers 30 W (5.2 V / 6 A) from 9-24 V input, then 25 W (5.2 V / 5 A) from 24-32 V, and 18 W (5.2 V / 3.5 A) from 32-36 V.

How much heat must be dissipated when running at the 30 W rating all day?

At 9-24 V input the synchronous rectification design achieves high efficiency, so only a fraction of the 30 W becomes heat; the compact 63×27×10 mm case relies on natural convection.

Which input connector must my power source provide to use the DC terminals?

The module accepts a bare-wire DC input range of 9-36 V through its screw terminals; no specific barrel jack or proprietary plug is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.