Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00997563BTC
In stock
KEHIPI
KEHIPI CSI to HDMI Extension Module 15pin 60mm FPC Cable Pack of 2
Extends Raspberry Pi and Jetson camera signals up to 5 metres using standard HDMI cable and includes a 15-pin 60 mm FPC link
- Colorfor Rpi Camera V1 V2
- Extends Raspberry Pi cameras up to 10 meters using standard HDMI cable
- Includes two 15-pin 60 mm FPC cables for direct camera connection
- Supports Pi Camera V1, V2, V3 and HQ modules
- Adds three auxiliary signals via headphone jack for GPIO or audio
- Compatible with Raspberry Pi 4B, 3B+, 3B, 2, Zero and Jetson Orin Nano
CSI-HDMI Camera Extension Module
This KEHIPI CSI to HDMI extension module adapts Raspberry Pi camera V1, V2, V3 and HQ modules to standard HDMI cabling. Two adapter boards and two 15-pin 60 mm FPC cables are included, allowing the CSI signal to travel over longer high-speed HDMI links. The boards also carry three extra signals through a headphone jack connector for audio, GPIO or sensor use. Supported hosts include Raspberry Pi 4B, 3B+, 3B, 2, Model A/B/B+, Pi Zero and NVIDIA Jetson Orin Nano.
Makers needing longer camera runs
Builders who want to place a Pi camera several metres from the board benefit from the noise-resistant HDMI extension and the three auxiliary channels. Users whose cameras must stay within the short native FPC length, or who prefer a direct CSI-to-CSI ribbon, will not need this adapter set. The module does not add any image processing or compression; it only transports the existing CSI stream.
15-pin 60 mm FPC cable included
Each kit supplies two 15-pin 60 mm flexible flat cables that mate directly with the camera module and the adapter board. If your camera uses a different pin count or pitch, the supplied FPCs will not connect.
Highlights
- Extends Raspberry Pi cameras up to 10 meters using standard HDMI cable
- Includes two 15-pin 60 mm FPC cables for direct camera connection
- Supports Pi Camera V1, V2, V3 and HQ modules
- Adds three auxiliary signals via headphone jack for GPIO or audio
- Compatible with Raspberry Pi 4B, 3B+, 3B, 2, Zero and Jetson Orin Nano
Specifications
| Brand | Arducam |
|---|---|
| Color | for Rpi Camera V1 V2 |
Questions about this item
How do I decide between the V1, V2, V3 and HQ camera versions this module supports?
The module works with all four camera boards — V1 (5MP OV5647), V2 (8MP IMX219), V3 (12MP IMX477) and HQ (12MP IMX477) — so choose the camera that matches your resolution and sensor needs; the adapter itself is identical for each.
What does running the camera over 10 metres with a high-speed HDMI cable mean in practice?
It means the CSI signals are converted to travel over a standard HDMI cable up to 10 metres without signal loss, letting you place the camera far from the Raspberry Pi or Jetson board while keeping full bandwidth.
What does the headphone-jack connector on the board add to the HDMI extension?
It carries three extra signals — such as audio, GPIO or other sensor lines — alongside the video stream so you can extend more than just the camera data over the same cable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
