We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small blue circuit board with screw terminals and USB-C port

KEHIPI

KEHIPI Buck Converter 8.2V-32V to 3V-20V 4.8A USB-C Power Adapter

SKU CH-M1YB-R0WKR

A step-down converter that accepts 8.2 V to 32 V DC input and delivers an adjustable 3 V to 20 V output at up to 4.8 A, with USB-C and USB-A ports for fast charging

  • TypeBlue Pro/1pcs
  • Dimensions10.0 in x 27.0 in x 10.0 in
  • Weight0.1 lb
  • Adjustable 8.2V-32V input suits varied DC sources
  • Synchronous rectification delivers high-efficiency step-down conversion
  • USB-C fast-charge identification powers phones quickly
  • DC jack plus screw terminals simplify device wiring
  • 8A peak output handles demanding loads reliably

Adjustable DC Buck Converter for USB-C Devices

This buck converter accepts a DC input range of 8.2V to 32V and delivers an adjustable output of 3V to 20V at up to 4.8A. It is suited for engineers, hobbyists and technicians who need to power or charge USB-C equipment from higher-voltage sources such as 12V or 24V battery systems. The module includes both a DC jack and screw terminals for flexible wiring.

Synchronous Rectification for Efficient Step-Down

The regulator uses a synchronous rectification scheme to maintain high efficiency across the wide voltage range while supplying large current. In normal operation the circuit steps down voltage with minimal heat rise, keeping thermal load low without active cooling. The compact board measures 10.0 by 27.0 by 10.0 inches and weighs 0.1 lb, allowing it to fit in tight enclosures.

Dual USB Ports with Fast-Charge Detection

A USB-C port and a USB-A port share a quick-charge identification chip that automatically negotiates fast-charging protocols with compatible phones and tablets. Both ports can be used simultaneously only when the USB-A device is connected first, though this disables fast charging. When the USB-C port is negotiating a fast-charge voltage, attaching a 5V load to the USB-A port risks damaging that load.

Highlights

  • Adjustable 8.2V-32V input suits varied DC sources
  • Synchronous rectification delivers high-efficiency step-down conversion
  • USB-C fast-charge identification powers phones quickly
  • DC jack plus screw terminals simplify device wiring
  • 8A peak output handles demanding loads reliably

Specifications

BrandDROK
ModelFBA200731
Part NumberFBA200731
TypeBlue Pro/1pcs
Dimensions10.0 in x 27.0 in x 10.0 in
Weight0.1 lb

Questions about this item

How do I wire the KEHIPI buck converter to a 24V source so the USB-C port delivers 12V at up to 4.8A?

Connect the 24V supply to the DC input terminals observing polarity, then use the onboard adjustment to set the output to 12V; the USB-C port will then provide up to 4.8A for fast charging.

What ongoing check does the step-down regulator need after months of continuous operation?

Periodically verify the output voltage with a multimeter and ensure terminal screws remain tight, as vibration can loosen connections and cause drift over time.

At what input voltage does the converter hit its thermal limit first during sustained 4.8A loads?

The unit reaches its thermal ceiling quickest at the maximum 32V input while delivering 4.8A, because the voltage drop across the regulator is greatest there.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.