We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KEHIPI

KEHIPI AC 110V/220V to DC 12V 20A 240W Power Adapter

SKU CH-JRS4-PC85H

Converts AC 110V or 220V to adjustable DC 12V with three independent channels sharing a 20A 240W total limit and full protection suite

  • ColorBlack
  • Dimensions8.1 in x 4.5 in x 2.2 in
  • Dual 110V/220V input suits global mains voltage
  • Adjustable 12V output ±15% fine-tunes connected loads
  • Three independent output channels power multiple devices
  • Full protection suite guards against overload and short circuits
  • Indoor-rated metal enclosure fits 8.1 x 4.5 x 2.2 in footprint

Indoor 240 W switching supply

The KEHIPI unit converts AC 110V or 220V to a regulated DC 12V output rated at 20A and 240W. Three independent channels share the total capacity so multiple LED strips, cameras or automation modules can run from one enclosure. A built-in selector sets the mains voltage and a trim potentiometer allows ±15% output adjustment.

Sustained-load behaviour

Continuous draw should stay at or below 16A (192W) to avoid shortening the supply’s lifespan. Protection circuits for over-voltage, over-current, overload, over-temperature and short-circuit will shut the unit down if limits are exceeded. After an over-current trip the supply auto-recovers roughly 10 minutes after the mains cable is removed and reconnected.

Pre-installation checks

Verify that the installation site is indoor only and that a qualified electrician will handle wiring, as no cord, switch, screws or instructions are supplied. Confirm the input selector matches local mains (left for 110V, right for 220V) before applying power. Ensure the combined load of all connected devices does not exceed the 16A continuous guideline.

Highlights

  • Dual 110V/220V input suits global mains voltage
  • Adjustable 12V output ±15% fine-tunes connected loads
  • Three independent output channels power multiple devices
  • Full protection suite guards against overload and short circuits
  • Indoor-rated metal enclosure fits 8.1 x 4.5 x 2.2 in footprint

Specifications

BrandHenxlco
Model20
Part Number20
ColorBlack
Dimensions8.1 in x 4.5 in x 2.2 in

Questions about this item

How much heat and noise does the 240 W supply produce when running all day?

The unit has no fan listed, so it relies on passive cooling; keep the vents clear and dust the interior every two to three months to prevent thermal shutdown.

What must I already own to install this 12 V 20 A adapter?

You need an AC mains cord with the correct plug, wiring cable to your 12 V loads, mounting screws and basic electrical tools; no cord, switch or hardware is included.

Will the adjustable ±15 % output work safely with my existing 12 V LED strips and cameras?

Yes, the yellow trimmer lets you fine-tune the voltage, and the manual recommends loading each channel to no more than 16 A (192 W) for long life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.