KEHIPI
KEHIPI 80W 110V LCD Soldering Iron Kit 356-896(180-480)
An 80 W soldering iron kit with LCD temperature display, adjustable from 180 °C to 480 °C, heating in 20 seconds and including five tips, stand, solder wire and 1.7 oz flux paste
- Color/Finish80w Kit
- Heats to working temperature in 20 seconds with 80W power
- LCD screen shows exact temperature from 180°C to 480°C
- Four ventilation holes and heat-resistant handle keep grip cool during long sessions
- Kit includes iron, five tips, stand, sponge, 1.7oz rosin flux paste and solder wire
- Switch between °C and °F with a simple button combination
80W Soldering Iron Kit
The KEHIPI 80W 110V LCD soldering iron kit delivers adjustable heat for electronics, jewelry and general repair work. It reaches working temperature in roughly 20 seconds and covers a range of 180-480 °C or 356-896 °F. The digital display shows the current setting clearly. A heat-resistant handle and four ventilation holes on the tip improve comfort during long sessions.
Compatibility Check
Verify that your workspace has access to a 110 V mains supply before ordering. The kit includes five interchangeable tips, a stand, conventional sponge, solder wire and 1.7 oz no-clean rosin flux paste. No additional power adapter or proprietary consumables are required. Ensure the bench area can accommodate the stand and ventilation needs.
Upgrade Path
This kit replaces basic fixed-temperature pencil irons that lack digital feedback and rapid heat-up. The jump is worthwhile when you need repeatable temperature control across varied materials such as circuit boards, wiring or metal jewellery. It is not suited for buyers who require industrial-grade thermal capacity or specialised tips beyond the five supplied.
Highlights
- Heats to working temperature in 20 seconds with 80W power
- LCD screen shows exact temperature from 180°C to 480°C
- Four ventilation holes and heat-resistant handle keep grip cool during long sessions
- Kit includes iron, five tips, stand, sponge, 1.7oz rosin flux paste and solder wire
- Switch between °C and °F with a simple button combination
Specifications
| Color/Finish | 80w Kit |
|---|
Questions about this item
What comes in the 80W kit and is anything else required?
The kit includes the soldering iron, five interchangeable tips, a stand, sponge, solder wire and 1.7oz no-clean rosin flux paste; no extra items are needed to start working.
How do I decide between Celsius and Fahrenheit on the LCD?
With the iron off, hold the plus or minus button while powering on; the screen will show °C or °F, then hold the same button to toggle and release to save the choice.
What does the 180-480°C range mean when I am actually soldering a circuit board?
It lets you set low heat around 180°C for delicate joints or raise it toward 480°C for larger copper areas, and the 80W heater reaches the selected temperature in about 20 seconds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
