We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KEHIPI

KEHIPI 60W Buck Boost Converter 6-36V to 0-36V 5A Color LCD power adapter

SKU CH-E44R-TMMTQ

Adjustable buck-boost converter steps 6–36 V input to 0–36 V at up to 5 A and 60 W with colour LCD readout and multiple protections

  • Type60W
  • ColorMulticolor
  • Weight0.1 lb
  • Wide 6-36V input suits solar and battery sources
  • Adjustable 0-36V output at up to 5A for flexible loads
  • 88% conversion efficiency reduces heat and wasted energy
  • Colour LCD shows volts, amps, watts, capacity and time
  • Nine protection modes with buzzer alarm guard against faults

KEHIPI 60W Buck Boost Converter for Portable Power

This adjustable DC-DC converter accepts an input range of 6-36V and delivers a regulated output of 0-36V at up to 5A. It is suited for hobbyists and technicians who need a compact module to power or charge batteries from solar panels or mobile DC sources. The unit includes a colour LCD that shows voltage, current, power, capacity, energy and time readings.

Practical limits of the 60W buck-boost topology

Continuous output is rated at 60W and can reach 80W only when adequate heat dissipation is provided. The input current limit is capped at 5A, so the available output power falls at lower input voltages. Conversion efficiency is specified at 88%, and protection thresholds such as over-voltage at 38V, over-current at 5.2A and over-power at 65W are adjustable but cannot be exceeded.

Installation notes and common wiring mistakes

The module ships as a single board with screw terminals; no enclosure or mounting hardware is included. Reversing the battery positive and negative terminals will damage the device, so polarity must be verified before applying power. Default protection values such as low-voltage cut-off at 5.5V and over-temperature at 95°C are active unless reconfigured via the on-board menu.

Highlights

  • Wide 6-36V input suits solar and battery sources
  • Adjustable 0-36V output at up to 5A for flexible loads
  • 88% conversion efficiency reduces heat and wasted energy
  • Colour LCD shows volts, amps, watts, capacity and time
  • Nine protection modes with buzzer alarm guard against faults

Specifications

BrandDROK
Model60W
Part Number200724
Type60W
ColorMulticolor
Weight0.1 lb

Questions about this item

Should I choose the 60 W version or the 80 W version for my project?

The unit is rated at 60 W continuous output; it can reach 80 W only with additional heat dissipation that you must provide.

What does the 60 W rating mean when I connect a load?

It means the converter can supply up to 5 A across the 0–36 V output range, with total power not exceeding 60 W unless extra cooling is added.

What interface does it use and what practical limits does that impose?

It uses screw-terminal DC connections with a 6–36 V input range and 0–36 V output, so the input source must stay within 6–36 V and supply enough current for the desired output power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.