We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black PoE splitters with micro USB and RJ45 connectors

KEHIPI

KEHIPI 5V 2.4A PoE Splitter 2-Pack Micro USB RJ45 10/100Mbps 802.3af

SKU CH-CG74-JVWK6

Converts 48 V PoE to 5 V 2.4 A micro USB power and 10/100 Mbps Ethernet for non-PoE devices

  • Dimensions170.0 in x 120.0 in x 24.0 in
  • Weight0.11 kilograms
  • Powers micro-USB devices over Ethernet using 802.3af PoE
  • Delivers 5V 2.4A output with 10/100Mbps data pass-through
  • Extends power up to 300 feet from the PoE source
  • 5kV isolation protects connected equipment from surges
  • Two splitters included for multiple device deployments

What it is

The KEHIPI 5V 2.4A PoE Splitter is a two-pack adapter that converts IEEE 802.3af Power over Ethernet into a micro USB power connection and a 10/100Mbps RJ45 data port. It lets non-PoE micro USB devices such as Raspberry Pi 2 or 3, Fire TV Ethernet adapters, Wyze Cam v2, Arlo Pro 2, ASUS Tinker Board, Chromecast and similar hardware receive both power and network data over a single Ethernet cable up to 300 feet from the PoE source.

Installation and common issues

Each splitter connects inline between a PoE switch or injector and the target device using a standard Ethernet cable; no drivers or configuration are required. The unit delivers DC 5V at 2.4A from a DC 48V PoE input with 2.5kV isolation and automatic device detection before power is applied. Problems usually arise when the upstream switch or injector does not fully comply with the 802.3af standard, when the Ethernet cable exceeds the supported distance, or when the connected device draws more than 2.4A, causing the protection circuit to shut down.

Who it suits and who should look elsewhere

This splitter suits installers who need to power micro USB devices in locations without nearby AC outlets but within reach of an 802.3af PoE network drop. It is not suitable for devices that require higher output voltage or current, for equipment using USB-C or barrel power connectors, for networks that demand gigabit data rates, or for environments where no PoE infrastructure exists.

Highlights

  • Powers micro-USB devices over Ethernet using 802.3af PoE
  • Delivers 5V 2.4A output with 10/100Mbps data pass-through
  • Extends power up to 300 feet from the PoE source
  • 5kV isolation protects connected equipment from surges
  • Two splitters included for multiple device deployments

Specifications

BrandUCTRONICS
Dimensions170.0 in x 120.0 in x 24.0 in
Weight0.11 kilograms

Questions about this item

How do I confirm the 5V 2.4A output is active after connecting the splitter to my PoE switch?

The splitter detects the connected device before enabling PoE input; once the micro USB plug is attached to your Raspberry Pi or camera, the unit will deliver 5V at up to 2.4A and the Ethernet link will negotiate at 10/100Mbps.

What comes in the 2-pack and which items must I provide separately?

The package includes two 48V to 5V active PoE splitters with micro USB power plugs; you must supply an IEEE 802.3af compliant PoE switch or injector, an Ethernet cable of the required length, and the micro USB devices you wish to power.

Which version should I choose if my device draws close to 2.4A at 5V?

This model provides a fixed 5V 2.4A output from a 48V 802.3af PoE source, so select it when your micro USB device requires up to 2.4A; no other capacity variants are offered in this listing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.