We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 5 metre flexible LED strip in a clear silicone sleeve, 12 mm wide, with 300 surface-mount LEDs showing RGB and warm white diodes

KEHIPI

KEHIPI 5050 RGBW LED strip light 5m 300 LED 12V IP67

SKU CH-4MKH-XF7W1

Waterproof 5-metre strip with 300 LEDs mixing RGB and warm white for 16 million colours

  • FeaturesRGB+Pure white, 3 colors in 1 LED+pure white
  • Super-bright 300-LED output from 5050 RGBW chips
  • 4 ft reel with 60 LEDs per metre for even coverage
  • 150 RGB plus 150 warm-white LEDs create 16-million colour mixes
  • IP67 silicone sleeve protects against water and dust
  • Cuttable every 3 LEDs with 5-pin connectors for easy series linking

5 m RGBW LED strip for home lighting

The KEHIPI 5050 RGBW LED strip light delivers 300 LEDs over 5 metres at 60 LEDs per metre, combining 150 RGB LEDs with 150 warm white LEDs at 2700K to 3000K. It runs on DC12V and is rated IP67 with a 12 mm silicone sheath for indoor or outdoor decoration. No power adapter or controller is included.

5-pin +12V-G-R-B-W connector order

The strip uses a fixed 5-pin layout ordered +12V-G-R-B-W, which is not the common RGBW+ or +RGBW arrangement. Controllers and amplifiers must match this exact pin sequence to drive the four channels correctly. Mismatched wiring will prevent proper colour mixing and white output.

15 W to 60 W variable draw with 72 W supply headroom

Power ranges from 0.1 W per LED for a single colour up to 0.3 W per LED at full RGB mix, giving 3 W to 12 W per metre and 15 W to 60 W total. A DC12V 6 A 72 W supply covers peak load with margin; the strip can be cut every three LEDs and joined in series using the end connectors, though voltage drop may appear on long runs without a signal amplifier.

Highlights

  • Super-bright 300-LED output from 5050 RGBW chips
  • 4 ft reel with 60 LEDs per metre for even coverage
  • 150 RGB plus 150 warm-white LEDs create 16-million colour mixes
  • IP67 silicone sleeve protects against water and dust
  • Cuttable every 3 LEDs with 5-pin connectors for easy series linking

Specifications

BrandBTF-LIGHTING
FeaturesRGB+Pure white, 3 colors in 1 LED+pure white

Questions about this item

What does the 300 LED count mean for brightness on a 5 m run?

The strip contains 150 RGB LEDs and 150 warm-white LEDs at 60 LEDs per metre. Each LED draws 0.1 W for a single colour, 0.2 W for two colours and 0.3 W for three colours, giving a total load of 15 W to 60 W depending on the colours displayed.

How does the 5-pin +12V-G-R-B-W interface limit control options?

The fixed pin order requires a controller that matches +12V, green, red, blue and warm-white channels; it will not work with standard RGB or RGBW+ pinouts. The strip supports 256 grey levels per channel for colour mixing.

What mounting clearance does the 12 mm silicone sleeve need?

The IP67 silicone sheathing is 12 mm wide over a 10 mm FPCB. The strip can be cut between every three LEDs, and 5-pin connectors on both ends allow series linking within the voltage-drop limits of a 12 V supply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.