We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black HDMI KVM switch with single push button and three HDMI ports

KEHIPI

KEHIPI 4K@30Hz Bi-Directional HDMI Switch 2 Ports KVM Switch

SKU CH-69BM-E6PKC

A bi-directional HDMI switch toggles two sources on one display or one source across two displays at 4K@30Hz without external power

  • TypeAccessories
  • Switch two sources to one screen with a single button press
  • Send one source to either of two displays for flexible viewing
  • Enjoy 4K at 30 Hz plus 1080p and 3D with HDCP pass-through
  • Works without a power adapter using bus power over HDMI 2.0 cables
  • Connect consoles, PCs and streamers up to five metres away

4K@30Hz Bi-Directional HDMI KVM Switch

This KEHIPI KVM switch lets users route a single 4K display between two HDMI sources or send one source to either of two displays with a press of the front button. It targets desktop owners who share one monitor across a computer and a console or who need to mirror a laptop to a projector and a TV without unplugging cables. The unit draws power from the HDMI bus, so no external adapter is required. It is not suited for setups that need simultaneous output to two screens from one source.

Sustained 3.4Gbps signal handling

The switch maintains a stable 3.4Gbps bandwidth path during extended sessions, passing 4K@30Hz, 1080p and 3D content with HDCP and CEC intact. Because it relies on bus power, signal integrity stays consistent as long as the source devices supply adequate current through their HDMI ports. AWG26 cables up to 5 m on each side are supported without noticeable degradation. Users seeking 4K@60Hz or higher refresh rates will need a different solution.

Manual push-button switching

A single tactile button toggles between the two connected ports, giving immediate physical control without software or remote. Gold-plated HDMI 2.0 sockets accept standard cables from PCs, Fire TV Stick, Xbox 360, Xbox One, PS3, PS4, Blu-ray players, Apple TV, Roku, monitors, TVs and projectors. The compact plastic housing sits unobtrusively on a desk and requires no driver installation. Buyers needing automatic switching or IR remote control should look elsewhere.

Highlights

  • Switch two sources to one screen with a single button press
  • Send one source to either of two displays for flexible viewing
  • Enjoy 4K at 30 Hz plus 1080p and 3D with HDCP pass-through
  • Works without a power adapter using bus power over HDMI 2.0 cables
  • Connect consoles, PCs and streamers up to five metres away

Specifications

TypeAccessories

Questions about this item

Does the bus-powered design add any heat or noise when the KEHIPI 4K@30Hz switch runs all day?

No external power is needed and the unit draws bus power only, so it adds no fan noise and negligible heat during continuous use.

What HDMI cables must I already own to connect two sources and one display to the KEHIPI 4K@30Hz switch?

You need three standard HDMI 2.0 cables — one from each source to the switch and one from the switch to the display — with AWG26 wiring for runs up to 5 metres.

Will the KEHIPI 4K@30Hz switch pass 1080P 60 Hz from an older Xbox 360 to a modern 4K monitor without downscaling?

Yes, the switch supports full HD 1080P and 3D with HDCP pass-through and CEC, so a legacy 1080P source displays at its native rate on a newer screen.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.