KEHIPI
KEHIPI 4× USB 5V to 12V Step-Up Cable 5.5×2.1mm 1M
Powers 12 V devices such as routers or fans from any 5 V USB source using a 5.5×2.1 mm barrel plug
- Connector TypeUsb
- Color5V to 12V
- Connector DetailUsb
- ConstructionCopper
- FeaturesData Transfer
- Converts USB 5V power to 12V DC for compatible devices
- Built-in smart IC chip protects against overcurrent, overvoltage and short circuits
- 5×2.1mm DC plug fits routers, speakers, cameras and other low-power 12V gear
- 1 metre copper cable keeps power source at a convenient distance
- Pack of four cables powers multiple devices from standard USB ports
Four-cable step-up set
The KEHIPI pack contains four USB-to-DC cables that raise a 5 V supply to 12 V for low-power devices. Each cable ends in a 5.5 mm by 2.1 mm barrel plug and measures 1 M in length. They suit users who need to run routers, fans, speakers or similar gear from a standard USB port.
Copper conductors and barrel plugs
High-quality copper wire carries the converted current while a built-in smart IC chip provides overcurrent, overvoltage, overload and short-circuit protection. The USB-A male plug requires a 5 V 2 A source; lower-current ports may not start the connected equipment. The fixed 5.5 mm by 2.1 mm connector fits only jacks of that exact size.
Limited to low-draw 12 V loads
The step-up design cannot support high-current equipment, so devices such as large monitors or motor-driven appliances are unsuitable. Buyers who need more than the available output current or a different barrel diameter must choose another solution. The 3.2 ft cable length also restricts placement to within reach of the USB power source.
Highlights
- Converts USB 5V power to 12V DC for compatible devices
- Built-in smart IC chip protects against overcurrent, overvoltage and short circuits
- 5×2.1mm DC plug fits routers, speakers, cameras and other low-power 12V gear
- 1 metre copper cable keeps power source at a convenient distance
- Pack of four cables powers multiple devices from standard USB ports
Specifications
| Brand | AITRIP |
|---|---|
| Connector Type | Usb |
| Color | 5V to 12V |
| Connector Detail | Usb |
| Construction | Copper |
| Features | Data Transfer |
Questions about this item
What output voltage does the USB 5V to 12V step-up cable deliver?
The cable converts a USB 5 V input to a regulated 12 V DC output through the 5.5×2.1 mm barrel connector.
What barrel-plug size must my device accept for this cable to fit?
The cable terminates in a 5.5 mm outer diameter by 2.1 mm inner diameter male DC plug.
How do I connect the four cables so each device powers on reliably?
Plug each USB-A end into a port or charger that can supply at least 2 A at 5 V; the built-in boost IC will not start if the source current is lower.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



