We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four yellow metal tire chucks with locking clips

KEHIPI

KEHIPI 4 Pack Heavy Duty Closed Flow Lock On Tire Chuck Yellow

SKU CH-RKYP-SC5WJ

Four heavy-duty closed-flow lock-on tire chucks with clips, rated to 250 PSI and compatible with Schrader valves

  • Rated for 250 PSI heavy-duty inflation tasks
  • Closed flow design works with Schrader valves
  • ¼" female NPT threads fit most air inflators
  • Locking clip secures chuck to valve stem during use
  • Straight tip allows hassle-free tire filling access

4 Pack Lock On Tire Chucks

This set contains four heavy duty closed flow chucks for Schrader valves. They connect to inflators or gauges with ¼ inch female NPT threads. The brass components are rated for 250 PSI. Yellow finish aids visibility in a workshop or garage.

Brass Construction Handles Pressure

The solid brass body and internal parts tolerate 250 PSI during normal inflation tasks. Closed flow design opens the valve only when engaged, reducing air loss. Locking clip holds the chuck on the valve stem without constant hand pressure. Straight tip allows direct access to the valve.

Replaces Worn Or Missing Chucks

Swaps out damaged push on or clip on chucks that leak or slip off. The lock on mechanism suits users who want hands free inflation. Not for buyers needing an open flow design or a different thread size. Four pack covers multiple vehicles or workstations.

Highlights

  • Rated for 250 PSI heavy-duty inflation tasks
  • Closed flow design works with Schrader valves
  • ¼" female NPT threads fit most air inflators
  • Locking clip secures chuck to valve stem during use
  • Straight tip allows hassle-free tire filling access

Specifications

BrandAstroAI

Questions about this item

How do I install the ¼" female NPT thread onto my inflator without cross-threading?

Screw the brass chuck onto the inflator's male NPT fitting by hand until snug, then tighten gently with a wrench; over-torquing the soft brass threads is the step most people get wrong.

Which parts of the chuck will need replacement after repeated shop use?

The internal flow valve seal and the locking clip spring are the wear items; brass bodies at 250 PSI rating rarely fail unless corroded.

What pressure limit appears first during continuous high-volume inflation?

The 250 PSI rating of the brass components is the limiting factor; sustained operation above that pressure risks seal extrusion and clip deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.