We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Box of thirty-two lever wire connectors in five configurations, translucent orange nylon shells with flip-up levers

KEHIPI

KEHIPI 32pcs Lever Wire Connectors Assortment Kit 24-12 AWG

SKU CH-0RMQ-E3K8W

Assorted kit of 32 lever connectors covering 1-in-1 through 1-in-5 configurations for 24-12 AWG solid and stranded wire

  • Color Mapping32PCS
  • 32 connectors in one box cover every common splice
  • Flame-retardant Nylon PA66 housing resists heat and corrosion
  • Lever action joins wires in seconds with no tools
  • Built-in test points allow measurement without removing tape
  • Accepts solid 28-12 AWG and stranded 28-14 AWG wire

KEHIPI 32-piece Lever Wire Connector Kit

This assortment provides 32 lever-actuated splicing connectors in five port configurations for 24-12 AWG solid and 24-14 AWG stranded conductors. The kit suits electricians, automotive technicians and DIY installers who need quick, tool-free terminations in motors, controls, power supplies, appliances and lighting circuits.

Verify Wire Gauge and Port Count Before Ordering

Confirm that your conductors fall within 0.08-4.0 mm² solid or 0.08-2.5 mm² stranded sizes and that the mix of 18 single-port, 6 two-port, 4 three-port, 2 four-port and 2 five-port bodies matches the splice topology you plan. Each connector accepts stripped lengths of 10 mm and requires a full 90-degree lever lift to open the clamping unit.

Flame-Retardant Nylon PA66 Holds Up Under

The PA66 housings resist corrosion, ageing and high pressure while maintaining insulation and flame-retardant properties during sustained operation. Independent spring cages per port keep each conductor clamped separately, and built-in test points allow measurement without disturbing the connection, reducing re-work time by over 70 percent compared with tape or butt-splice methods.

Highlights

  • 32 connectors in one box cover every common splice
  • Flame-retardant Nylon PA66 housing resists heat and corrosion
  • Lever action joins wires in seconds with no tools
  • Built-in test points allow measurement without removing tape
  • Accepts solid 28-12 AWG and stranded 28-14 AWG wire

Specifications

BrandAITRIP
Color Mapping32PCS

Questions about this item

What connectors are in the 32-piece box and do I need anything else?

The box holds 18 pieces of 1 in 1 out, 6 pieces of 1 in 2 out, 4 pieces of 1 in 3 out, 2 pieces of 1 in 4 out and 2 pieces of 1 in 5 out lever connectors. No extra parts are required; strip wire to 10 mm and insert.

Which connector type should I pick for a single wire join versus a multi-wire branch?

Use a 1 in 1 out connector for a straight splice, 1 in 2 out for a three-wire junction, 1 in 3 out for four wires, 1 in 4 out for five wires and 1 in 5 out for six wires.

What does the 24-12 AWG rating mean when I am wiring a real circuit?

Each connector accepts solid wire from 0.08 to 4.0 mm² (28-12 AWG) and stranded wire from 0.08 to 2.5 mm² (28-14 AWG), so a single lever nut can join a range of cable sizes without tools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.