We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two USB-C to 5.5x2.1mm DC power cables, 100cm each, black finish

KEHIPI

KEHIPI 2PCS USB C to DC 5.5x2.1mm PD 12V Power Cable 100cm

SKU CH-YPGD-CW91B

Two USB-C to DC 5.5×2.1 mm cables with built-in PD chips deliver fixed 12 V at up to 3 A from any 12 V PD charger or power bank

  • TypeUSB
  • Connector TypeUSB Type C
  • Color12V
  • Connector DetailUSB Type C
  • Terminal GenderMale-to-Female
  • Apple CompatibleAmplifier
  • Powers 12 V devices from any PD charger with 12 V output
  • Built-in PD smart chip delivers stable 12 V at up to 3 A
  • 100 cm length gives flexible placement for routers, cameras, lights
  • 5 × 2.1 mm barrel fits 5.5 × 2.5 mm sockets without adapters
  • Two cables included so you can run two devices from one PD source

Two-cable set for 12 V DC devices

This pack contains two USB-C to 5.5 mm × 2.1 mm power cables, each 100 cm long. They convert a USB Power Delivery charger into a fixed 12 V output for routers, LED strips, CCTV cameras, speakers and similar equipment. A built-in PD smart chip negotiates the required voltage automatically. The cables are male-to-male and also fit 5.5 mm × 2.5 mm jacks.

Power delivery limits in daily use

Each cable supports a maximum of 60 W and delivers up to 12 V at 3 A. The source charger must provide at least 12 V PD output and its rated power should exceed the connected device’s draw. The supplier notes the cable is compatible with supplies below 36 W; higher-wattage adapters may trigger overload protection. No data transfer is possible through these cables.

Behaviour under sustained load

The output voltage is fixed at 12 V and cannot be changed to 9 V, 15 V or 20 V. Because the cable only passes power, it does not generate heat itself; thermal performance depends entirely on the PD charger and the powered device. Continuous operation is stable as long as the charger maintains the negotiated 12 V contract and the load stays within the 3 A limit.

Highlights

  • Powers 12 V devices from any PD charger with 12 V output
  • Built-in PD smart chip delivers stable 12 V at up to 3 A
  • 100 cm length gives flexible placement for routers, cameras, lights
  • 5 × 2.1 mm barrel fits 5.5 × 2.5 mm sockets without adapters
  • Two cables included so you can run two devices from one PD source

Specifications

BrandAITRIP
TypeUSB
Connector TypeUSB Type C
Color12V
Connector DetailUSB Type C
Terminal GenderMale-to-Female
Apple CompatibleAmplifier
FeaturesLightweight

Questions about this item

How do I install the 5.5×2.1 mm DC plug on my router, and what step do people get wrong?

Connect a USB-C PD charger that supplies 12 V, then insert the 5.5 mm × 2.1 mm male plug into the router's DC jack; the common mistake is using a 5 V or 9 V charger instead of a 12 V PD source.

What maintenance or replacement will the cable need later?

The cable has no moving parts; inspect the USB-C and 5.5×2.1 mm connectors for bent pins or frayed insulation after extended use and replace the cord if the jacket cracks.

What limit appears first during sustained 12 V 3 A operation?

The built-in PD chip is rated for 36 W maximum, so continuous 12 V 3 A loads will hit that 36 W ceiling before the 60 W cable rating becomes relevant.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.