We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small green circuit boards with USB-C connectors and screw terminals

KEHIPI

KEHIPI 2PCS USB-C PD 2.0 3.0 to DC Trigger 100W ZY12PDN USB Board

SKU CH-KYKJ-VA4E4

Two USB-C PD trigger boards deliver up to 100 W at 20 V using hardware IC protocol for stable laptop charging from power banks

  • ColorZY12PDN USB Board
  • Constructioncopper
  • Delivers up to 100W power for demanding devices
  • Supports PD 2.0 and 3.0 protocols for broad compatibility
  • Hardware IC trigger ensures stable voltage negotiation
  • Includes 5.08 mm screw terminals for secure wiring
  • Two boards included for multiple project builds

USB-C PD Trigger Board Kit

This kit provides two ZY12PDN trigger boards that negotiate power delivery with a USB-C source and output adjustable DC voltage through a 5.08 mm screw terminal. It is intended for engineers and hobbyists who need to power DC devices from a PD-capable charger or power bank.

Sustained 100W Power Delivery

The hardware protocol IC maintains a stable PD 2.0 or 3.0 handshake so the board can continuously deliver up to 100W at 20V and 5A without dropping the negotiated voltage. A large ceramic capacitor, TVS surge protection and a low-resistance copper construction keep temperatures controlled during extended operation.

PD-Only Voltage Negotiation

The trigger negotiates only PD 2.0 or 3.0 profiles from 3V to 20V and does not support QC or other proprietary fast-charge protocols. Users must ensure the connected load can withstand the selected voltage because the board provides no step-down regulation or current limiting beyond the source capability.

Highlights

  • Delivers up to 100W power for demanding devices
  • Supports PD 2.0 and 3.0 protocols for broad compatibility
  • Hardware IC trigger ensures stable voltage negotiation
  • Includes 5.08 mm screw terminals for secure wiring
  • Two boards included for multiple project builds

Specifications

BrandAITRIP
ColorZY12PDN USB Board
Constructioncopper

Questions about this item

Does the trigger board itself generate noticeable heat or draw extra power when running a 100 W load continuously?

The board is rated for up to 100 W at 20 V and 5 A; any heat produced depends on the connected cable and load, not on the trigger circuit alone.

What must I already have to make one of these boards deliver power to my device?

You need a USB-C Power Delivery 2.0 or 3.0 source capable of the desired voltage, plus a DC cable soldered to either the 5.08 mm screw terminals or the USB-A footprint on the board.

Will this trigger work with an older USB-A charger that only supports Quick Charge?

No — the board only negotiates PD 2.0 or 3.0 voltages; it does not support Quick Charge or other proprietary fast-charge protocols.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.