KEHIPI
KEHIPI 24V to 12V 20A 240W Buck Converter power adapter
Steps 24 V down to 12 V at 20 A with 95 % efficiency and IP68 waterproofing
- Type24V to 12V 20A
- Weight248 grams
- Converts 24 V input to stable 12 V output
- Delivers 20 A continuous current for 240 W loads
- Achieves up to 95 % conversion efficiency
- IP68-rated aluminium housing resists water dust and shock
- Smart-chip protection guards against over-current overload short-circuit and over-heat
24V to 12V 20A Buck Converter
This KEHIPI buck converter steps a nominal 24 V DC source down to a regulated 12 V output at up to 20 A and 240 W. It suits golf-cart accessories, LED lighting arrays and other 12 V loads that must run from a 24 V battery bank.
Simple wiring with built-in protection
Connect the input leads to a 20–30 V supply and the output leads to the 12 V circuit; the module starts after a 2 s delay. Over-current, over-load, low-load, short-circuit and over-heat protections are handled by the onboard smart chip, so no external fuses or thermal management are required.
Check your source voltage and load current
Verify that the supply stays within the 20–30 V input range and can deliver the required 10 A maximum input current. Ensure the total 12 V load does not exceed 20 A, and confirm the operating environment falls between –40 °C and 80 °C for reliable operation.
Highlights
- Converts 24 V input to stable 12 V output
- Delivers 20 A continuous current for 240 W loads
- Achieves up to 95 % conversion efficiency
- IP68-rated aluminium housing resists water dust and shock
- Smart-chip protection guards against over-current overload short-circuit and over-heat
Specifications
| Brand | HOMELYLIFE |
|---|---|
| Model | 24-12/20A |
| Part Number | 24-12/20A |
| Type | 24V to 12V 20A |
| Weight | 248 grams |
Questions about this item
How can I confirm the converter is delivering a stable 12 V output after wiring it to my 24 V system?
Measure the output with a multimeter under load; it should read 12 V ±2 % with no more than 50 mV ripple. The built‑in smart chip also activates over‑current, over‑load, low‑load, short‑circuit and over‑heat protection automatically.
What comes in the package and do I need any extra cables or fuses?
The box contains one 24 V to 12 V 20 A 240 W voltage reducer module with an IP68‑rated aluminium shell. Input and output wires are not included, so supply your own appropriately rated cables and an external fuse if your installation requires one.
Which input‑voltage range suits a typical 24 V golf‑cart battery bank?
The converter accepts 20 V to 30 V input, covering a nominal 24 V bank through its full charge‑discharge cycle. It draws up to 10 A on the input side and delivers 12 V at 20 A continuously.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



