We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KEHIPI

KEHIPI 200359 buck converter 6.5-36V to 1.2-32V 4.5A 75W LCD power adapter

SKU CH-D54D-SR93W

A step-down DC-DC module that converts 6.5-36 V input to a 1.2-32 V output at up to 4.5 A, with an LCD showing voltage, current and power

  • Colorclear black
  • Weight2.82 ounces
  • Adjust output voltage without tools using button control
  • LCD shows input and output voltage, current and power
  • Stable 3.5A continuous current, peaks to 4.5A with cooling
  • Input reverse-connection protection prevents wiring damage
  • Up to 94% conversion efficiency reduces heat loss

Buck converter with LCD and button control

The KEHIPI 200359 is a step-down module that accepts an input range of 6.5 to 36 volts and delivers an adjustable output from 1.2 to 32 volts. It is intended for engineers, hobbyists and technicians who need a compact DC-to-DC power supply with built-in metering and push-button adjustment instead of trimmer screws.

Thermals, noise and power draw

Conversion efficiency is rated at about 94 percent, so waste heat stays low at typical loads. The unit runs silently with no fan; it can sustain 3.5 amps continuously with natural convection and reach 4.5 amps when additional heat dissipation is provided. Quiescent current is approximately 30 milliamps.

Adjustable current limit decides suitability

The constant-current limit is adjustable between roughly 4.2 and 4.5 amps, which sets the maximum load the module can protect. Buyers who need a higher guaranteed current threshold or output anti-backflow protection for direct battery charging without an external diode should look elsewhere.

Highlights

  • Adjust output voltage without tools using button control
  • LCD shows input and output voltage, current and power
  • Stable 3.5A continuous current, peaks to 4.5A with cooling
  • Input reverse-connection protection prevents wiring damage
  • Up to 94% conversion efficiency reduces heat loss

Specifications

BrandDROK
Model200359
Part Number200359
Colorclear black
Weight2.82 ounces

Questions about this item

How do I install the crystal protection case that ships as separate parts?

The case is packed separately to avoid shipping damage; after receiving the module, assemble the case around the 70.5 × 48.4 × 28 mm board before use.

What maintenance will the LCD display need over time?

The LCD shows input and output voltage, current and power with ±0.1 V and ±0.05 A accuracy; no calibration is mentioned, so normal use requires no scheduled maintenance.

At what sustained load does thermal protection become the limiting factor?

Continuous operation is rated at 3.5 A (50 W) with natural cooling; reaching 4.5 A (75 W) requires enhanced heat dissipation, so the 3.5 A limit appears first under sustained use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.