We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

KEHIPI

KEHIPI 12V 15A 180W Power Adapter 110V/220V Dual Channel

SKU CH-BA7N-Q1X1K

Dual-channel 12 V 15 A regulated switching supply with selectable 110 V/220 V input, adjustable output ±15 % and full protection suite for LED strips, CCTV and indoor electronics

  • ColorBlack
  • Dimensions8.2 in x 4.0 in x 1.9 in
  • Dual 110V/220V input suits worldwide mains
  • Adjustable 12V output ±15% for precise device matching
  • Two independent channels each deliver up to 15A 180W
  • Full protection suite guards against over-voltage, over-current and short circuits
  • Compact 8.2×4.0×1.9 in metal enclosure fits tight installs

Dual-Channel 12V 15A Power Supply

The KEHIPI adapter converts AC 110V or 220V input into dual-channel DC 12V output. Each channel delivers up to 15A and 180W, while the combined total is rated at 15A and 120W. It suits LED strips, CCTV systems and similar 12V projects. Indoor use only.

Adjustable Output with Protection Limits

Output voltage is adjustable by ±15% via a yellow trimmer. Maximum continuous draw should not exceed 80% of full load, or 12A and 144W per channel. Built-in protections cover over-voltage, over-current, overload, over-temperature and short-circuit events. Auto-recovery activates after roughly 10 minutes if protection triggers.

Input Selection and Wiring Checks

A black slide switch selects 110V or 220V AC input; set correctly before plugging in. No power cord, wiring cables, on/off switch or mounting screws are included. Professional installation by a qualified electrician is recommended. Verify your devices draw less than 12A each and confirm indoor placement.

Highlights

  • Dual 110V/220V input suits worldwide mains
  • Adjustable 12V output ±15% for precise device matching
  • Two independent channels each deliver up to 15A 180W
  • Full protection suite guards against over-voltage, over-current and short circuits
  • Compact 8.2×4.0×1.9 in metal enclosure fits tight installs

Specifications

BrandHenxlco
Model15
Part Number15
ColorBlack
Dimensions8.2 in x 4.0 in x 1.9 in

Questions about this item

How do I decide between running one device on a single channel or splitting the load across both channels?

Each channel can deliver up to 15A 180W, but the combined total is capped at 15A 120W. Use one channel for a single load up to 12A 144W; use both channels only when the sum of both loads stays within the 120W total.

What does the 180 W rating mean when the adapter is installed in my system?

The 180 W figure is the per-channel peak. In practice you should not exceed 80% of that, so plan for a maximum continuous draw of 144 W on any one channel and 120 W across both channels together.

How does the 110V/220V input selector affect what I can plug in?

A physical switch on the unit selects either 110 V or 220 V AC input. Set it to the left for 110 V (USA/CA) or right for 220 V before connecting mains power; the adapter does not auto-range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.