We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible LED strip on a reel, 10 metres long, IP67 silicone tube, 600 addressable 5050 RGB LEDs, 24V, 3-pin JST connector visible

KEHIPI

KEHIPI 10m/roll WS2811 600 LED 24V IP67 lighting

SKU CH-YSNV-2FV06 MPN 10m/roll

Addressable 24 V RGB strip with 600 WS2811 LEDs in 10 m IP67 silicone, individually controllable in six-LED groups

  • ColorBlack FPCB IP67
  • App-Enabledapplication
  • SpecificationsALITOVE
  • Dimensions1000.0 in x 1.0 in x 0.3 in
  • Weight500 grams
  • Package Contents3pin JST connector, silicone clips, mini screws
  • Addressable RGB control per 6-LED segment with WS2811 IC
  • 24V operation eliminates voltage drop across the full 10m length
  • IP67 silicone tube protects against water ingress
  • Compatible with Raspberry Pi and SP-series controllers
  • 600 x 5050 SMD LEDs deliver 256-level brightness and 24-bit colour

Product identity

This addressable RGB LED strip uses WS2811 ICs on a 24 V DC circuit to drive 600 5050 SMD LEDs across a 10 m black PCB. Each IC controls a group of six LEDs for 256-level brightness and 24-bit colour. The IP67 silicone tube suits indoor or outdoor installations that need individually programmable colour effects.

Build integration

A 24 V power supply rated for at least 6 A and a compatible WS2811 controller are required but not included. The strip works with Raspberry Pi, T1000S, K1000C and SP-series Bluetooth, Wi-Fi or music controllers. The 10 m continuous run eliminates the need for signal amplifiers or mid-run power injection. A 3-pin JST connector, silicone clips and screws are provided for wiring and mounting.

Upgrade context

The 24 V design replaces 12 V 5 m WS2811 strips that suffer voltage drop and require extra amplifiers for longer runs. Builders who need a single 10 m length without additional hardware will benefit. Projects that need shorter runs, lower voltage or a different control protocol are not served by this strip.

Highlights

  • Addressable RGB control per 6-LED segment with WS2811 IC
  • 24V operation eliminates voltage drop across the full 10m length
  • IP67 silicone tube protects against water ingress
  • Compatible with Raspberry Pi and SP-series controllers
  • 600 x 5050 SMD LEDs deliver 256-level brightness and 24-bit colour

Specifications

BrandALITOVE
ModelAL10m2811BK600WP
ColorBlack FPCB IP67
App-Enabledapplication
Part NumberAL10m2811BK600WP
SpecificationsALITOVE
Dimensions1000.0 in x 1.0 in x 0.3 in
Weight500 grams
Package Contents3pin JST connector, silicone clips, mini screws

Questions about this item

Does the 24 V strip draw the full 144 W continuously without voltage drop?

The 24 V design keeps all 600 LEDs at full white for the full 10 m run without voltage drop so the 144 W maximum is sustained.

How much heat does the IP67 silicone tube add during all-day operation?

The IP67 silicone tube protects the 5050 SMDs at 120° beam angle; heat scales with the 6 A current draw at 24 V.

Which separate 24 V power supply and WS2811 controller must I already own?

A 24 V 6 A supply and any WS2811 24 V controller (SP105E SP110E SP108E SP106E SP107E or Raspberry Pi T1000S K1000C) are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.