We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White flexible LED strip on reel with black connectors

KEHIPI

KEHIPI 10m/roll WS2811 24V 600 LED Addressable RGB Strip Lighting

SKU CH-BHYV-EZN1M MPN 10m/roll

Addressable 24 V RGB strip with 600 LEDs in 10 m continuous length, IP20, no voltage drop at full white, WS2811 IC per six LEDs, compatible with Raspberry Pi and SP-series controllers.

  • ColorWhite FPCB IP67
  • App-Enabledapplication
  • SpecificationsALITOVE
  • Dimensions1000.0 in x 1.0 in x 0.3 in
  • Weight500 grams
  • Package Contents3pin JST connector, silicone clips, mini screws
  • Individually addressable 6-LED groups enable custom animations
  • 24 V operation keeps 10 m bright without voltage drop
  • IP67 silicone coating protects against dust and water
  • Compatible with Raspberry Pi and popular SPI controllers
  • 600 LEDs at 60 per metre deliver dense colour coverage

Addressable RGB strip for DIY lighting projects

This 10 metre WS2811 LED strip contains 600 individually addressable 5050 RGB LEDs grouped in six-LED segments driven by 100 WS2811 ICs. It operates at 24 V DC and draws up to 6 A for a maximum of 144 W. The white FPCB is rated IP20 and offers a 120 degree beam angle. Controllers and power supply are not included.

Check power and controller compatibility first

You must provide a 24 V DC power supply capable of at least 6 A and a WS2811-compatible controller such as the listed SP105E, SP108E, SP110E, SP106E, SP107E, SP501E or MHCTRWF5V models. The strip uses a 3-pin JST connector and requires an app or programmable controller to generate effects. Verify your controller supports the BRG colour order used by this strip.

Replaces two 5 m 12 V strips with amplifier

The 24 V design eliminates voltage drop across the full 10 m length, so a single continuous run replaces two shorter 12 V strips plus a signal amplifier. This reduces wiring complexity and installation time for large projects such as building outlines or venue lighting. The upgrade is worthwhile when you need uninterrupted 10 m runs without extra power injection points.

Highlights

  • Individually addressable 6-LED groups enable custom animations
  • 24 V operation keeps 10 m bright without voltage drop
  • IP67 silicone coating protects against dust and water
  • Compatible with Raspberry Pi and popular SPI controllers
  • 600 LEDs at 60 per metre deliver dense colour coverage

Specifications

BrandALITOVE
ColorWhite FPCB IP67
App-Enabledapplication
Part NumberAL10M2811WH600WP
SpecificationsALITOVE
Dimensions1000.0 in x 1.0 in x 0.3 in
Weight500 grams
Package Contents3pin JST connector, silicone clips, mini screws

Questions about this item

Does the 10 m roll ship with a power supply or controller, and what connectors are included?

The package contains the 10 m WS2811 LED strip, one 3‑pin JST connector, silicone clips and mini screws. A 24 V 6 A power supply and a compatible WS2811 controller must be purchased separately.

Which voltage version should I choose for a single 10 m run without voltage drop?

The 24 V DC version is specified for 10 m continuous length with no voltage drop even at full white output, so no power injection is required along the run.

What does the 600 LED count mean for addressable control on this strip?

The strip has 600 LEDs driven by 100 WS2811 ICs; each IC controls a group of 6 LEDs, giving 100 individually addressable segments with 256 brightness levels and 24‑bit colour.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.