We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small rectangular wire connectors in translucent orange plastic with grey lever actuators

KEHIPI

KEHIPI 10 Pcs Lever Nuts Wire Connectors 2 in 4 Out

SKU CH-XM8J-0Q022

Pack of ten push-in lever connectors joining two incoming wires to four outgoing paths for solid conductors up to 4 mm² and stranded up to 2.5 mm², rated 400 V and 32 A

  • Color Mapping10Pcs 2 in 4 out
  • Quick tool-free wiring with push-in lever design
  • Handles 0.08-4.0 mm² solid and 0.08-2.5 mm² stranded wire
  • Rated 400 V and 32 A for reliable power connections
  • Flame-retardant PA66 shell withstands -40 °C to 105 °C
  • Reusable connectors with M3 mounting holes for secure installation

10-Piece Lever Connector Kit

This set provides ten lever-operated wire connectors with a two-input, four-output layout. They suit electrical installers and DIY users who need quick, tool-free splicing for solid or stranded conductors. The PA66 housings are flame-retardant and rated for continuous operation from minus forty to one hundred five degrees Celsius.

Sustained Load Behaviour

Each connector carries a rated current of thirty-two amperes at four hundred volts. The electrolytic copper contacts are tin-plated, and the clamping springs use high-alloy nickel-chromium steel to maintain contact pressure over time. This construction resists corrosion, aging and high-temperature degradation during prolonged use.

Interface Practical Limits

The push-wire ports accept solid wire from zero point zero eight to four square millimetres (AWG twenty-eight to twelve) and stranded wire up to two point five square millimetres (AWG twenty-eight to fourteen). Each unit includes M3 mounting holes on both sides for secure screw fixation. Buyers needing more than four outputs per connector or a higher voltage rating will need a different solution.

Highlights

  • Quick tool-free wiring with push-in lever design
  • Handles 0.08-4.0 mm² solid and 0.08-2.5 mm² stranded wire
  • Rated 400 V and 32 A for reliable power connections
  • Flame-retardant PA66 shell withstands -40 °C to 105 °C
  • Reusable connectors with M3 mounting holes for secure installation

Specifications

BrandAITRIP
Color Mapping10Pcs 2 in 4 out

Questions about this item

Do the 400V 32A lever nuts generate noticeable heat when running continuously at full load?

The connectors are rated for 400V and 32A with a maximum operating temperature of 105°C; the flame-retardant PA66 shell and nickel-chromium steel springs are designed to handle sustained current without excessive heat buildup.

What wire gauges and tools do I need to use these 2-in-4-out lever nuts?

They accept solid wire from 0.08–4.0mm² (AWG 28–12) and stranded wire from 0.08–2.5mm² (AWG 28–14); the push-wire lever operates tool-free, while M3 screw holes on each side allow optional panel mounting.

Can I mix older AWG 14 solid wire with newer AWG 12 stranded wire in the same 2-in-4-out block?

Yes — each of the four output ports independently clamps any wire within the 0.08–4.0mm² solid or 0.08–2.5mm² stranded range, so mixed gauges are supported in a single connector.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.