KATA KT260409R pneumatic accessory 8PCS hole saw kit 25 32 38 51 54mm 48mm depth
Eight-piece hole-saw kit cuts up to 1.89 in deep in wood, plastic and drywall with five blades from 25 to 54 mm
- MaterialSteel
- Compatibility/FitmentElectric Drill, Impact Drill, Bench Drill
- Selling UnitIndustrial, 1, 5 pcs saw blades, 1 pc mandrels, 2 pc drill b
- FeaturesIndustrial
- Item Count1, 5 pcs saw blades, 1 pc mandrels, 2 pc drill bits, 1 pc he
- Commercial/ResidentialIndustrial
- Deeper 48 mm cut reduces stops on thick panels
- 8-piece kit covers 25–54 mm diameters for common tasks
- Heat-treated carbon steel teeth give clean cuts in wood and plastic
- Works with electric, impact and bench drills
- Includes mandrel, two drill bits and hex key for quick changes
Hole saw kit with 48 mm cutting depth
The KATA KT260409R is an 8-piece hole saw kit built for electric, impact and bench drills. It contains five carbon-steel saw blades, a mandrel, two pilot drill bits and a hex key in a single box. The blades are heat-treated and coated for corrosion resistance and clean cutting.
Suited for wood, plastic
This set handles soft wood, thin plywood, PVC panels, plastic and drywall in typical DIY, cable-routing, plumbing and furniture tasks. It is not intended for glass, ceramic, tile, stone, brick, masonry or other hard and brittle materials.
48 mm maximum cutting depth decides the job
The 1.89-inch (48 mm) deep-cut capability lets you bore through thicker panels in one pass, reducing the need to stop and clear waste. If your material exceeds this depth, a longer saw or a different approach is required.
Highlights
- Deeper 48 mm cut reduces stops on thick panels
- 8-piece kit covers 25–54 mm diameters for common tasks
- Heat-treated carbon steel teeth give clean cuts in wood and plastic
- Works with electric, impact and bench drills
- Includes mandrel, two drill bits and hex key for quick changes
Specifications
| Brand | KATA |
|---|---|
| Model | KT260409R |
| Material | Steel |
| Compatibility/Fitment | Electric Drill, Impact Drill, Bench Drill |
| Selling Unit | Industrial, 1, 5 pcs saw blades, 1 pc mandrels, 2 pc drill bits, 1 pc hex key |
| Features | Industrial |
| Item Count | 1, 5 pcs saw blades, 1 pc mandrels, 2 pc drill bits, 1 pc hex key, Industrial |
| Commercial/Residential | Industrial |
| Part Number | KT260409R |
Questions about this item
When will the carbon-steel teeth on the 25 32 38 51 54 mm saw blades need replacing?
Replace blades once the teeth lose their edge on soft wood, plastic or drywall; the set includes five sizes so you can swap only the worn diameter.
What stops a continuous cut deepest in 48 mm thick plywood?
The 48 mm cutting depth is the limit; beyond that the blade cannot clear chips and the hole must be finished from the opposite side.
How hot do the 51 mm and 54 mm blades get during all-day drilling?
Heat-treated carbon steel with anti-rust coating runs warm but not excessively; pause occasionally to let the blades and mandrel cool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
