Kastar
Kastar PSP-110H 2-pack camera battery 1500mAh 3.7V 5.6Wh
Two lithium-ion batteries rated 1500 mAh and 3.7 V replace the Sony PSP-110 cell in PSP-1000 through PSP-1010 models
- TypeBattery
- Pack2 Batteries
- ChemicalLi-Ion
- Capacity5.6 Wh
- Dimensions3*2*2 Inch
- FeaturesHigh Capacity and Manufacture Price.
- Extended play time with 1500mAh lithium-ion capacity
- Two batteries included for uninterrupted gaming sessions
- Built-in protection against over-charge and over-heating
- Meets UL1642 and CE safety standards for reliability
- Compatible with PSP-1000 through PSP-1010 models
Replacement battery for Sony PSP consoles
This two-pack supplies 3.7 V lithium-ion cells rated at 1500 mAh and 5.6 Wh each. They fit the original PSP-110 battery compartment and the listed PSP-1000 through PSP-1010 and PSP Fat models. The chemistry is Li-Ion with built-in protection circuits for over-charge, over-discharge, over-voltage, over-current and over-heating. Buyers who need a different form factor or a higher voltage will not be served by this pack.
Capacity and headroom for handheld gaming
Each cell delivers 1500 mAh at 3.7 V, giving 5.6 Wh of energy for extended play sessions. The high-capacity rating means longer run time between charges compared with lower-rated alternatives. The protection circuitry stops charging or discharging when limits are reached, so the battery shuts down safely rather than pushing past its design envelope. Users who require multi-day uptime without recharging will find the capacity insufficient.
Practical limits of the PSP battery interface
The pack uses the proprietary PSP-110 connector and physical layout, so it only works in the compatible Sony models listed. No other device accepts this form factor, and the 3.7 V nominal voltage is fixed by the console's power rail. The cells meet UL1642 and CE safety standards, but they cannot be charged outside the PSP or a dedicated PSP charger. Builders adapting the cells for other projects must design their own protection and charging solution.
Highlights
- Extended play time with 1500mAh lithium-ion capacity
- Two batteries included for uninterrupted gaming sessions
- Built-in protection against over-charge and over-heating
- Meets UL1642 and CE safety standards for reliability
- Compatible with PSP-1000 through PSP-1010 models
Specifications
| Brand | Kastar |
|---|---|
| Model | PSP-110H |
| Part Number | BA-2B-PSP110H-A |
| Type | Battery |
| Pack | 2 Batteries |
| Chemical | Li-Ion |
| Capacity | 5.6 Wh |
| Dimensions | 3*2*2 Inch |
| Features | High Capacity and Manufacture Price. |
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Kastar Q120 2-Pack Li-Ion Camera Battery 2300mAh 3.7V 8.51Wh MN35Z Q8 Q8N
- Battery
- 2 Batteries
Kastar PSP-110H 3-pack 1500mAh 3.7V Li-ion camera battery
- Battery
- 3 Batteries
Questions about this item
Will the Kastar PSP-110H battery fit my original PSP-1000 model?
Yes, the PSP-110H is listed as a direct replacement for the Sony PSP-110 battery used in the PSP-1000, PSP-1001, PSP-1002 and all other Fat models shown.
How can I confirm the 1500mAh cells are healthy after the first charge?
Charge both packs fully, then run the PSP until it shuts down; a runtime close to the original 5.6 Wh rating shows the cells are performing to spec.
Does the 2-pack include a charger or only the two batteries?
The pack contains two PSP-110H lithium-ion batteries and no charger; you will need to use the PSP's own AC adapter or a compatible cradle to charge them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
AGM Global Vision Fuzion TM25-384 Fusion Thermal Monocular
- Monoculars
Logitech 952-000116 Polarizing Filter for Scribe
- Polarizer
- System Requirements…








