Kastar
Kastar PS4 Battery Replacement 2000mAh 3.7V 7.4Wh 1-Pack
Replacement lithium-ion battery for PlayStation 4 DualShock 4 controllers, 2000mAh 3.7V 7.4Wh with built-in protection circuits
- TypeBattery
- Pack1 Battery
- ChemicalLi-Ion
- Capacity7.4 Wh
- Dimensions3*2*1 Inch
- FeaturesHigh Capacity and Manufacture Price.
- Higher capacity extends play sessions with 2000mAh lithium-ion cell
- Replaces Sony LIP1522 and KCR1410 batteries in DualShock 4 controllers
- Built-in protection guards against over-charge, over-discharge, over-voltage, over-current and over-heating
- Meets UL1642 and CE safety standards for reliable operation
- 7V 7.4Wh energy rating matches original controller specifications
Replacement Battery for DualShock 4 Controllers
This Kastar lithium-ion cell replaces the Sony LIP1522 and KCR1410 packs used in first- and second-generation DualShock 4 controllers. It fits CUH-ZCT1 and CUH-ZCT2 model numbers across all regional variants. The single-pack format suits owners who need one fresh power source for a worn-out pad.
Capacity Marked at 2000mAh and 3.7V
The battery delivers 7.4 Wh at a nominal 3.7 volts, matching the original specification for the PlayStation 4 gamepad. UL1642 and CE listings confirm the cell meets recognised safety requirements. Built-in protection guards against over-charge, over-discharge, over-voltage, over-current and over-heating.
Straightforward Swap With Basic Tools
Installation requires opening the controller shell and disconnecting the original pack, then plugging in the new connector. Common issues include stripping the small housing screws or damaging the ribbon cable if the case is forced apart. Patience and a correctly sized screwdriver prevent most problems.
Highlights
- Higher capacity extends play sessions with 2000mAh lithium-ion cell
- Replaces Sony LIP1522 and KCR1410 batteries in DualShock 4 controllers
- Built-in protection guards against over-charge, over-discharge, over-voltage, over-current and over-heating
- Meets UL1642 and CE safety standards for reliable operation
- 7V 7.4Wh energy rating matches original controller specifications
Specifications
| Brand | Kastar |
|---|---|
| Model | PS4 |
| Part Number | BA-1B-PS4-B |
| Type | Battery |
| Pack | 1 Battery |
| Chemical | Li-Ion |
| Capacity | 7.4 Wh |
| Dimensions | 3*2*1 Inch |
| Features | High Capacity and Manufacture Price. |
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Kastar LB-015 camera battery 1200mAh 3.7V 4.4Wh 1-pack
- Battery
- 1 Battery
Kastar NP-FH50 7.4V 1200mAh Li-Ion camera battery 1-pack
- Battery
- 1 Battery
Questions about this item
How long will the 2000 mAh capacity actually run a DualShock 4 controller?
The 2000 mAh rating at 3.7 V stores 7.4 Wh, which typically provides several hours of gameplay per charge depending on vibration, light-bar brightness and headset use.
Does the built-in protection circuit comply with UL 1642 and CE standards?
Yes, the cell meets UL 1642 and CE safety requirements and includes over-charge, over-discharge, over-voltage, over-current and over-heating protection.
Will this battery fit inside a CUH-ZCT2E DualShock 4 without modification?
It is a direct replacement for the Sony LIP1522/KCR1410 pack used in CUH-ZCT1 and CUH-ZCT2 series controllers, so it fits the original compartment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
AGM Global Vision Fuzion TM25-384 Fusion Thermal Monocular
- Monoculars
Logitech 952-000116 Polarizing Filter for Scribe
- Polarizer
- System Requirements…








